-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Exciting New Technology: Thermal Risk Management
March 1, 2017 | Douglas G. Brooks, PhDEstimated reading time: 1 minute
Two years ago I entered into a collaboration with Dr. Johannes Adam, from Leimen Germany. Johannes has written a software simulation tool called Thermal Risk Management (TRM). We used it to look at the thermal characteristics of PCB traces under a variety of conditions, and it is hard for me to contain my excitement and enthusiasm for what it does and what we learned about traces using it. Our collaboration resulted in the publication of numerous articles and a book. In this article, I’ll talk about some of the capabilities of TRM that really caught my attention. (Note: TRM has much more power than I will have space to discuss in this article. See the technical note at the end of the article for more on this.)
TRM allows us to model a PCB trace and predict its thermal properties. So the first thing we did was model a variety of traces and compare the results with the data in IPC-2152. The data fit very well, giving us confidence that the process was valid. But if the software could fit a single trace in isolation, then it could also predict the temperature of a trace under a variety of other conditions that board designers more typically face, such as changes in length, the proximity of adjacent traces, and the presence of planes. For example, Figure 1 illustrates the thermal patterns around a trace with and without a plane directly under the trace. The presence of a plane clearly lowers the trace temperature and widens the area of the board where the thermal profile spreads.
But TRM also allows us to view things in many other dimensions. For example, Figure 2 shows the thermal profile of a cross-sectional view of the board underneath the trace. The thermal profile underneath the trace through the board without the plane extends all the way to the far side, but the thermal profile of the board with the plane changes dramatically at the plane. I know of no other way to look at this profile other than with a computer simulation.
To read this entire article, which appeared in the February 2017 issue of The PCB Design Magazine, click here.
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.