Stretching Beyond Flex
March 30, 2017 | Andy Behr, Panasonic Electronic MaterialsEstimated reading time: 1 minute
Emerging end-use electronic applications are driving dramatic innovations in circuit board and interconnection technology. New form factors, functionality and durability requirements are challenging the status quo for the PCB industry and pushing design, material and process development to the limit. Incipient devices like wearables, epidermal monitors, embedded sensors, smart labels, human machine interfaces (HMIs), conformable antennas, flexible displays and in-mold electronics (IME) require a combination of circuit stretchability and toughness that isn’t achievable with conventional circuit manufacturing technologies.
Device manufacturers are seeking alternative methods for creating wiring patterns and interconnecting components that are more conformable, elastic and durable than currently available. To set the stage for a discussion on stretchable circuit technology, this article describes two classes of polymers commonly used for manufacturing circuit boards and outlines the developmental arc of two fundamental PCB materials, conductive circuits and organic substrates. The article concludes by reviewing stateof-the art, commercially available stretchable substrate and conductor technologies, as well as new materials and processes that are being researched.
Thermoplastic and Thermosetting Polymers
Broadly speaking, the polymers used for manufacturing electronics may be divided into two classes: thermoplastic and thermoset. The division is based on the degree of chemical cross-linking between the constituent molecules and the temperature-related mechanical properties this cross-linking (or lack thereof) imparts. Depending on the resin system, both classes of polymers can exhibit a wide variety of properties. For example, both thermoplastic and thermoset resins can run the gamut of hardness physiognomies from rigid and brittle to flexible and bendable to elastomeric and stretchable.
Thermoplastic polymers typically have a low degree of intermolecular cross-linking. The long chain polymer molecules are tightly “tangled” at temperatures below the glass transition (Tg), resulting in a solid or “glassy” material.
To read the full version of this article which appeared in the March 2017 issue of The PCB Magazine, click here.
Suggested Items
SEMI Applauds U.S. Chips Act Award for Samsung Electronics Facilities to Strengthen Domestic Semiconductor Supply Chain
04/17/2024 | SEMISEMI, the industry association serving the global electronics design and manufacturing supply chain, applauded the United States Department of Commerce’s announcement of a Preliminary Memorandum of Terms for an award under the CHIPS and Science Act to support the expansion of Samsung Electronics’ presence in Texas and the company’s development and production of leading-edge chips.
Ark Electronics Expands Global Manufacturing Factory Network in North America and Europe
04/17/2024 | PRNewswireElectronic Manufacturing Company Ark Electronics recently announced the expansion of its Global Factory Network with the addition of Electronics Manufacturing Service (EMS) capabilities in Mexico and Europe.
SIA Applauds CHIPS Act Incentives for Samsung Manufacturing Projects in Texas
04/16/2024 | SIAThe Semiconductor Industry Association (SIA) released the following statement from SIA President and CEO John Neuffer applauding semiconductor manufacturing incentives announced by the U.S. Department of Commerce and Samsung.
Report Reveals ‘True Impact’ of Manufacturing is Nearly a Quarter of UK GDP
04/15/2024 | Manufacturing Technologies AssociationManufacturing is having a far greater impact on the UK economy than first thought according to a major new report released today.
Design Community Town Hall Review
04/11/2024 | Kelly Dack, CID+, EPTACThe Design Community Town Hall took place on the afternoon of April 10, 2024. I was fortunate to attend this event, which marked an opportunity for members of some newly found design groups to get together and exchange ideas. Peter Tranitz, senior director of solutions for IPC, opened the session with a slide presentation introducing these new groups and members within the solutions department.