Crucial Considerations for Building Flexible Heaters
April 12, 2017 | John Talbot, Tramonto CircuitsEstimated reading time: 1 minute
Introduction
An electronic heater is created by driving electric current through a resistive element. As the current is drawn through the element, some of the energy is expelled as heat. That heat can then be transferred to other surfaces with positive effects. It is a convenient way to keep components above damaging temperatures or to heat surfaces to a specified temperature and keep them there. Some of the first heaters were simple nickel-chromium wires attached to a power source and wrapped around a mass to transfer heat. This is effective, but not practical in all applications. Heaters that are designed on flexible material can be attached to flat surfaces, equipped with temperature sensing devices, and monitored constantly so that adjustments are possible as the ambient surroundings change. Two types of flexible heater material are common: silicon rubber and polyimide. This article will focus on flexible polyimide heaters.
Common Uses
Flexible heaters are used to keep components, typically microprocessors, at a consistent temperature in devices that are exposed to conditions that have varying temperatures. They are used to heat surfaces as well. For instance, the seat or steering wheel in your car. Biological samples are sometimes better analyzed at the typical body temperature for a human or animal. Batteries and electronics in aircraft that must operate normally at 30,000 feet above the earth are kept warm with flexible heaters.
Handheld electronics as well as ATMs that must operate accurately in cold climates will use flexible heaters to keep critical components in the specified temperature range. The uses are not trivial and one may say critical in many applications. No matter the product or what function it provides, flexible heaters are an important element in the electronics industry.
Design Criteria
For a flexible heater to be designed accurately, we must first understand several things:
- The material to be heated
- The temperature range of the product’s surroundings
- How fast the heat must be transferred to the material
To read the full version of this article which appeared in the March 2017 issue of The PCB Magazine, click here.
Suggested Items
OE-A at LOPEC: Printed Electronics Powers Sustainability
02/06/2024 | OE-AThe “OE-A Competition 2024” shows the many possibilities of flexible, organic, and printed electronics with inspiring products, prototypes, and fresh designs live at LOPEC 2024, the leading international exhibition and conference for flexible, organic, and printed electronics in Munich.
All Flex Solutions Invests in New Flexible Circuit Facility
02/05/2024 | All Flex SolutionsAll Flex Solutions has started the equipment build-out of a completely new flexible circuit manufacturing facility in Minneapolis. The building was purchased in 2020, and was completely renovated to accommodate the company’s plans for a brand new state-of-the-art flexible circuit fabrication plant.
Flexible Printed Circuits: A Design Primer
12/19/2023 | Chris Keirstead, PFC Flexible CircuitsFlexible circuits consist of conductive strips in a sandwich of insulating or dielectric material. They resist moisture and contamination and are insulated from external shorts, with holes or contact surfaces for interconnection. Understanding a package’s electrical requirements and not over-designing permits means taking full advantage of a flexible circuit’s potential compared to conventional wiring.
Intel Technology Helps Power Solution for a More Resilient Grid
11/29/2023 | IntelAhead of Enlit Europe, Intel announced that its technology is helping power the Edge for Smart Secondary Substations (E4S) Alliance’s new solution to modernize the energy grid.
Würth Elektronik Launches Research Project HyPerStripes
11/27/2023 | Wurth ElektronikHyPerStripes project partners will create a technology platform including manufacturing techniques for roll-to-roll (R2R) processing as well as the integration of electronic components onto very long ("endless"), flexible and stretchable printed circuit boards.