Material Choices for High-Speed Flexible Circuits
April 27, 2017 | G. Sidney Cox, COX CONSULTINGEstimated reading time: 1 minute
Abstract
High-speed rigid boards have existed for many years, with fluoropolymers being the most common dielectric used. More recently, flexible circuit materials have been developed, and these new products use a variety of polymer (including fluoropolymers) and composite film approaches to allow high-speed flex circuits. This article will provide guidelines on how to compare the different options. The electrical benefits of the different polymers and constructions will be reviewed as well as the physical and flexible properties of different constructions. As with any new materials, the ease of processing is an important consideration, especially since some of these new products use thermoplastic adhesives or require high-temperature lamination of bondplies and coverlays.
Introduction
High-speed rigid boards have existed for many years and continue to improve. Initially, most high-speed rigid boards used fluoropolymer dielectrics (fluorine-containing polymers like Teflon®). Now many new dielectrics have been developed for high-speed rigid boards, which has broadened both the material supplier base and the number of fabricators that can make high-speed rigid boards.
Materials for high-speed flexible circuits are a much more recent development. This article will review the key material choices for making high-speed flexible circuits while also explaining why older flex materials were not a good choice for today’s high-speed circuits.
When talking about high-speed circuits, we are really talking about controlled impedance applications. This could be either microstrip or stripline designs. This paper will discuss flexible clads, as well as bondplies and coverlays. For controlled impedance circuits, the electrical properties of the clad and bondplies are critical for striplines. The electrical properties of the clad and coverlay are critical for microstrips.
To read the full version of this article which appeared in the April 2017 issue of The PCB Magazine, click here.
Suggested Items
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Ventec to Launch New Bondply Dielectrics and Value-Added Services at IPC APEX EXPO 2024
03/26/2024 | Ventec International GroupVentec International Group is to reveal new products for advanced signal integrity and thermal performance, and introduce services, during IPC APEX EXPO 2024, April 9-11 on booth # 4309.
Electra Polymers Ltd Expands Manufacturing Capacity, Invests in New Facilities and Talent
03/26/2024 | Electra Polymers LtdElectra Polymers Ltd, a leading provider of coatings for the electronics industry, proudly announces a significant expansion of its manufacturing capacity for inkjet materials. The company is making substantial investments in new facilities, talent acquisition, and cutting-edge laboratory equipment to meet the increasing demand for high-performance functional inkjet materials in the market.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
03/22/2024 | Nolan Johnson, I-Connect007This week's news feed contains a bunch of big money items, as well as some interesting industrial and technology puzzles to be solved. There’s even some down-home people news from the Dallas SMTA conference held this week. Don’t overlook the latest issue of PCB007 Magazine, either. The topic is sustainability, which is becoming an ecosystem of its own.