Embedded Technology: A Useful Tool in Freedom CAD’s Toolbox
July 17, 2017 | Andy Shaughnessy, PCBDesign007Estimated reading time: 1 minute
Freedom CAD has been designing and fabricating boards with embedded technology for years, and doing some innovative work along the way. I asked Scott McCurdy, Freedom CAD’s director of sales and marketing, to share some details about their embedded processes, as well as the challenges and opportunities that embedded technology offers.
Andy Shaughnessy: Scott, I know that Freedom CAD has some experience with embedded technology. Tell us a little about that. Do you do a lot of embedded work?
Scott McCurdy: We see increasing use of buried capacitance cores in the designs we do for our customers. This technology has been around for many years, but there are thinner materials available today that use thin film dielectrics instead of woven fabrics. There are many benefits for integrating embedded capacitance layers into board designs for improving the power delivery network. Our signal integrity engineer believes strongly that embedded capacitors definitely have a place in today's designs where, at frequencies between 10 and 100MHz, a low-inductance energy storage strategy can actually reduce the number of low-value caps needed on a board.
Shaughnessy: That’s interesting. And I understand you’ve done some embedded capacitance designs with FaradFlex material.
McCurdy: Yes, we have several customers who spec this Oak-Mitsui Technologies FaradFlex material especially in high-speed telecom applications. DuPont and 3M make materials for embedded capacitance applications, as well. These thin film type materials have thinner dielectrics than woven fabric which provides additional benefits.
Shaughnessy: Does Freedom CAD do any buried resistor designs?
McCurdy: We have very little experience with buried resistors, mostly because our customer base isn’t asking for this. However, as product miniaturization continues, I’m certain that industry will have to embrace the use of embedded resistor technologies. It’s another method of freeing up surface space and increasing performance and reliability. Some of the CAD design vendors have software tools for designing embedded resistor layers. Ticer Technologies and Ohmega Technologies make great materials for this.
To read this entire article, which appeared in the June 2017 issue of The PCB Design Magazine, click here.
Suggested Items
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Orbex Secures £16.7m Investment for Rocket ‘Ramp Up’ Period
04/24/2024 | OrbexThe UK spaceflight company Orbex has received £16.7m from six backers in an update to its Series C funding round.
Real Time with... IPC APEX EXPO 2024: Going Vertical: SCHMID's Advanced Solutions for Printed Circuit Boards
04/24/2024 | Real Time with...IPC APEX EXPOEditor Marcy LaRont chats with Bob Ferguson, the president of SCHMID, about advanced solutions for PCBs and the equipment they are highlighting at this year's show. He delves into vertical no-touch handling systems and the prospect of achieving sub-10-micron lines. Inspired by SCHMID's technology, Bob expresses excitement about where the industry is today.
Real Time with... IPC APEX EXPO 2024: Advancements in Laser Depaneling with LPKF
04/24/2024 | Real Time with...IPC APEX EXPOJake Benz, LPKF sales manager for North America, discusses the company's advancements in laser depaneling. LPKF has introduced a green wavelength laser for processing rigid FR-4 circuit boards, bringing significant gains in processing speeds to market. The company transitioned from IR CO2 to UV wavelength due to heat and burning issues.
Adura Solutions Exhibits at Del Mar 2024
04/24/2024 | Adura SolutionsSumit Tomar, CEO of Adura Solutions, has announced that his company will be exhibiting at this year’s Del Mar Electronics and Manufacturing Show to be held at the Del Mar Fairgrounds, San Diego, California, April 24-25.