-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueOpportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
Manufacturing Know-how
For this issue, we asked our expert contributors to share their thoughts on the absolute “must-know” aspects of fab, assembly and test that all designers should understand. In the end, we’re all in this together.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Impact of HDI on PCB Power Distribution
December 27, 2017 | Craig Armenti, MentorEstimated reading time: 2 minutes
High-density interconnect (HDI) technology is often used to meet the requirements of today’s complex designs. Smaller component pitches, larger ASICs and FPGAs with more I/O, and higher frequencies with shrinking rise-times all require smaller PCB features, driving the need for HDI. Beyond some of the more obvious electrical effects of the microvias used on HDI designs, there is also an impact to the power integrity the PCB. This includes different effects of mounted inductances of decoupling capacitors, changes in plane performance due to reduction in perforation from chip pinouts, and the inherent plane-capacitance changes from using dielectrics of various thicknesses.
HDI Primer
HDI can be a confusing topic, especially for new engineers and designers, or those not well versed in the subject matter. Although this article is not intended to be an in-depth tutorial on HDI technology, a quick review of the key aspects is appropriate.
HDI is a technology that, through a combination of high density attributes, allows for a higher wiring density per unit area as compared to traditional PCB technology. In general, HDI PCBs contain one or more of the following: reduced trace width and spacing, microvias including blind and buried, and sequential lamination.
Current generation HDI designs are typically found in mobile phones, digital cameras, laptops and wearables to name just a few. Basically, whenever a product needs to be compact and/or lightweight, then HDI technology will most likely be applied. The benefits of HDI technology include:
- Reduced space requirement using smaller vias, reduced trace width and reduced trace spacing, all of which allow components to be placed in closer proximity
- Reduced layer count as a result of increased routing channels on internal layers
- Improved signal integrity due to shorter distance connections and lower power requirements
- Improved power integrity due to ground planes closer to the surface parts and improved distribution of capacitance
- Potential to lower fabrication and assembly costs by consolidating multiple PCB’s into a single PCB
When utilizing HDI technology, two basic HDI structures exist:
- Build-up or sequential build-up (SBU) structures
- Any-layer structures
A key aspect of HDI technology is the use of microvias. For reference, the IPC HDI Design Committee has identified microvias as any hole equal to or less than 150 microns. Multiple types of HDI stack-ups associated with blind and buried microvias can be used to meet the density and cost requirements for today’s products. Design teams should develop stack-ups in conjunction with the board fabricator to minimize cost and meet signal integrity requirements. There may also be additional requirements related to plating and specific materials. As a rule, the vendor will adjust all the stack-up variables as needed during their process to meet the end-product requirements.
To read this entire article, which appeared in the November 2017 issue of The PCB Design Magazine, click here.
Suggested Items
Keynote Preview: Reshaping our Engagement With the World
03/28/2024 | Shawn DuBravac, IPCThe widespread integration of AI across various sectors is broadening its impact, from revolutionizing healthcare with Smart solutions to transforming homes into intuitive spaces, highlighting its crucial role in boosting efficiency and addressing complex challenges. In healthcare, we're witnessing a trend toward personalized care with AI-driven devices like intelligent pillows to mitigate snoring, sophisticated sleep monitors, and innovative patient monitoring systems.
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Accenture Invests in Sanctuary AI to Bring AI-Powered, Humanoid Robotics to Work Alongside Humans
03/27/2024 | BUSINESS WIREAccenture has made a strategic investment, through Accenture Ventures, in Sanctuary AI, a developer of humanoid general-purpose robots that are powered by AI and can perform a wide variety of work tasks quickly, safely and effectively.
AT&S Well Prepared to Benefit from AI Boom
03/26/2024 | AT&SThe rapid progress in the development of artificial intelligence promises to revolutionize all areas of daily life in the coming years. In order to operate such AI systems, an enormous amount of computing power is required, which is provided by a vast network of data centres.
The IMAPS Show: A Conversation with John Andresakis
03/26/2024 | Marcy LaRont, PCB007 MagazineOn the last day of the IMAPS Device Packaging Conference, Marcy LaRont sat down with industry veteran John Andresakis of Quantic Ohmega, who attended the conference this week. Not his first time at this event, he talked about the conference, advanced technology, and trying to get the word out about the advanced packaging substrates solution Quantic is offering.