The Changing Shape of the HDI Market


Reading time ( words)

Evolution of the HDI PCB

Since their advent in the early-to-mid-1990s, high-density interconnect (HDI) PCBs have undergone several changes and could now be said to be entering their third evolution. Based on subtractive, or print-and-etch processes, the early HDI panels made use of traditional cores and sequential lamination steps to produce high-end boards with ~60 mm line and space (L/S) capabilities. But most importantly, they relied on microvias to enable their high interconnect density, which, at that time, could not be readily achieved with other technologies.

As board producers improved their processes, HDI board capability also improved; with the release of what we now accept as the smartphone, in the early 2000s, the second generation of HDI panels came into being. While the laser microvias remained, stacked vias began to replace staggered vias, and in combination with the “any layer” or “every layer” build-up technique, these new HDI boards eventually begin to exhibit 40 mm L/S.

Still based on subtractive technologies, this any-layer approach remains the king of the HDI techniques, and it is true to say that the majority of the advanced HDI PCBs that are typical to mobile devices are still produced with this technique. However, in 2017, the HDI market began its next evolution by starting to move away from subtractive processes and into those based on pattern plating. While still reasonably common in Europe and the USA, in Asia HDI has been generally limited to IC substrate manufacturers.

Semi-additive processing (SAP) uses pattern plating processes to realize features

To read the full version of this article which originally appeared in the September 2018 issue of PCB007 Magazine, click here.

Share

Print


Suggested Items

InduBond: Magnetic Induction Lamination

11/29/2019 | Real Time with...productronica
In this video interview, part of the productronica 2019 coverage, we spoke with Víctor Lázaro, R&D manager and technical director at Indubond. Víctor describes Indubond’s innovative methods for heating the boards to effect lamination through magnetic induction. Victor discusses the energy and operational efficiency that an induction method brings to the equipment: thermal profiles.

Multilayer Press Technology Using Magnetism to Produce Lamination Heat

11/11/2019 | Victor Lazaro Gallego, Chemplate Materials
A revolutionary concept in multilayer press technology has been developed that uses electromagnetic energy to heat the existing stainless-steel separator plates with a never-before dreamed-of accuracy and precision. The heating and cooling systems—embedded within a robust hydraulic press inside a vacuum chamber design—are controlled using a temperature feedback loop that guarantees perfect fidelity between the press recipe and the press result.

Why Designers Need to Be at the SMTA Additive Electronics Conference

10/18/2019 | I-Connect007
In a recent interview, Kelly Dack and Tara Dunn (Omni PCB president and conference co-chair) discussed why designers need to attend the SMTA Additive Electronics Conference. Tara will also be attending and moderating a panel discussion at the conference.



Copyright © 2019 I-Connect007. All rights reserved.