ESI’s Chris Ryder: There’s More to Choosing a Laser Than You Think


Reading time ( words)

Matties: Now, there are options in the technology of laser drills. What technology considerations should they have?

Ryder: It’s important to understand the range of applications that you have. For us, that typically means the range of via size and the typical aspect ratios bound to those via sizes. The types of materials you plan to process are also very important. Are these high-frequency materials, standard FR-4 materials, or ABF materials? Are they copper clad? If so, does it have 12- or 2-micron copper? Is this an mSAP process or a subtractive PCB process? Is it going to affect copper or glass? What kind of spot size is going to facilitate the via size that you need? I would say those are probably the key product technology distinctions and decisions to consider because ultimately, that tells us what laser regime is going to work best for you.

Matties: What I'm hearing is there are a lot of considerations and variables that you really have to weigh because this is not a small investment.

Ryder: By no means is it a small investment, but it is an important one.

Matties: Yes, so you want to get it right the first time.

Ryder: Absolutely.

Matties: Tell us about a little bit about the new technology you’re introducing here at the show.

Ryder: We're launching a product at the HKPCA called Geode. The Geode system is a CO2 via drilling system for the rigid HDI, SLP, and FCCSP market. The CO2 via drilling space is challenged at the moment with an influx of new materials with a broad range of market applications. As we discussed earlier, companies entering the market and making their first foray into HDI are really being pushed to the edge of demands in terms of via structure, count, and size from the OEMs. We've worked on devising a system that addresses that broad market without having to over-configure each individual system for each customer.

With this particular system, the way we do that is by leveraging the decades of experience we have in via drilling in the flex and rigid-flex market. That knowledge has given us a very detailed understanding of what our options are in terms of optics, beam steering, and laser power control. We’ve been able to harness a lot of these lessons that we've learned on the way from customers into a CO2 system package, which is quite unique for the industry. A lot of the things that we're doing for the system go above and beyond what the current competition is aiming to achieve. With that, we're trying to match customers' roadmaps and give them a system they can use for years to come, depending on their roadmap needs. We want them to get more out of the system for a longer time.

Matties: I looked at the system yesterday, and it looks great.

Ryder: Thank you.

Matties: It’s a beautiful design. It's rare that you walk through and say, "Wow, that's a pretty piece of equipment." The full window view on the front, the angles, the color look great, but looks are by far the least important in a decision. You've also managed to build it without a granite platform, which reduces the weight substantially.

Ryder: That's correct.

Matties: How do you get past the thinking that granite provides a higher degree of accuracy?

Ryder: Firstly, thank you for the compliments on the system design. I wish I could take credit for all of it, but this has clearly been a process of working directly with our customer base and our amazing engineers. As smart as the system looks, a lot of this is designed for ease of use, so the open space that you feel when you open the chamber is all geared towards easy maintenance and cleaning, less downtime in manufacturing, etc.

Again, it really has been a cooperative effort between our customers and in-house engineers. Part of that is the system footprint and dimensions, which includes weight. The granite-based via drilling system in CO2 is partially a legacy from the mechanical drilling days when these laser via drilling systems were adopted onto existing platforms. By no means is it something that's unnecessary; you have a lot of stability required when you move the stage at certain speeds, so there's certainly no reason to discount the granite-based platform as such. But we’ve found ways to move around this.

When we talk to customers across the world, we see a struggle to increase capacity with such a limited footprint. We see struggles to build up instead of out from a factory and the limitations you have when you put a 6.7-ton system on the second, third, or fourth floor. ESI has been manufacturing non-granite-based via drilling systems for decades. The question here is, “Why should this be fundamentally different with CO2?” So, we went back and did the engineering homework to figure out how to do that.

To your question on how we show the customer that this is indeed a possibility for them and something that can work for them, well, ultimately we're going to have to prove it to them. That is why we're here at HKPCA. We need to engage with our existing and future customer base. We'd like to show them through sample demonstrations and let them see themselves how the system works. We're an engineering company and have data to back up what we do. There's a strong legacy of this type of manufacturing that ESI brings to the table, and I think that's probably the single-most significant evidence at this point.

Matties: The other thing that I noted in my tour yesterday was the improved cycle time where I think you mentioned a 30% gain. Is that in time or total cost?

Ryder: We're looking at reducing both, so our premise is that reduced cycle time saves the customer money. With the system and the way we've aimed to configure it, we see a significant decrease in cycle time through drilling. The drill time is less, and how we're doing that is very unique in some cases. I won't go into detail at this time on how we do it other than to say that ESI is clearly an experienced manufacturer and leader in terms of optics and laser power delivery through the optics. We've been able to harness a lot of what we've learned in our UV system platform into the CO2, which gives us very unique capabilities to manipulate the CO2 pulse as well.

In the end, we're all dealt the same cards. You have this pulse—some are longer and some are shorter. ESI has the optics knowhow to really take out every little bit that we can from this pulse. We can harness the full pulse, so to speak. Again, without going into detail, what this translates into for a customer is increased throughput, flexibility, and power management capability. We want to help you get the energy to the work surface that you need and not just what you have.

Matties: This has been great. Chris, is there anything that we haven't talked about that you feel we should cover?

Ryder: We're very excited about this platform. This is a concerted effort to demonstrate to our customers the gratitude that we have for them working with us to help develop a system that makes their manufacturing better. We're thrilled to have this opportunity to show it off at a venue like this.

Matties: Thank you very much.

Ryder: Thank you for your time.

 

Share

Print


Suggested Items

Benchmarking Your Process Engineering

04/29/2021 | I-Connect007 Editorial Team
Mark Thompson has been in bare board fabrication for over 30 years. He is now laying out printed circuit boards at Monsoon Solutions, a high-tech design bureau near Seattle, Washington. With Mark’s extensive hands-on knowledge of PCB manufacturing, he brings a unique perspective to PCB design. In this discussion with the I-Connect007 editorial team, Mark shares what’s important from a process engineer’s point of view, and how to stay on top of evaluating and benchmarking your manufacturing process, along with insights from his new role as a designer.

Isola Releases IS550H Material

04/26/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Michael Gay of Isola and Chris Hunrath of Insulectro about the release of their new halogen-free, high-thermal reliability material, which they hope fills the gap in the market between epoxies and polyimides.

EIPC Technical Snapshot: Supply Chain and Material Price Pressures

04/26/2021 | Pete Starkey, I-Connect007
EIPC’s seventh Technical Snapshot webinar on April 14 was timely and appropriate. In the context of current supply chain issues and material price pressures facing the PCB industry, particularly in Europe, the EIPC team brought together an outstanding group of experts—each a leading authority in his field—to analyse and comment upon the areas of concern and to respond to questions raised by a capacity audience. As Alun Morgan said, “If you don’t use the European supply chain, you won’t have it anymore!”



Copyright © 2021 I-Connect007. All rights reserved.