-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Carl Schattke on Stackup Design and Managing the Component Shortage
February 28, 2019 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
At AltiumLive, I met Carl Schattke, CID+, a lead PCB designer with an American automaker. Carl and TTM’s Julie Ellis taught a packed class on good stackup practices complete with plenty of slides showing examples of all kinds of stackups. After the class, Carl explained why the stackup is often the root of manufacturing problems downstream, and why today’s discrete component shortages are likely to be around for quite some time.
Andy Shaughnessy: Carl, I saw part of your class with Julie Ellis. It was pretty interesting and entertaining stuff. How did you get the idea to put the class together?
Carl Schattke: We were thinking about different presentations, and Julie thought that it might be useful to co-present on PCB layer stackups because I bring a design perspective and she brings the manufacturer perspective. We decided it would be useful to put a presentation together that would address how to communicate between a designer and the manufacturer, what information to communicate, and why that’s important.
When I was planning the talk, initially, I thought, “Wow, this is a big subject.” There's a lot of different areas to pull in because you have the physics of the board technology, and then you have the communication with your vendor. Then, there are all of the parameters that are involved with PCB layer stackup. It impacts your cost and lead times, and impacts who you can make the board with. As I said in my talk, it's basically how an artist uses a canvas. Our artwork requires a board layer stackup. When we put all of our geometry on there, it starts with the layer stackup, and our paintbrushes are the components and traces we use; that's how we end up with beautiful art work.
It's technical, unlike somebody with an easel, but it's the same kind of thing. We are looking to create artwork that is going to be manufacturable, cost efficient, and effective in providing the electrical connectivity that we are looking for. I wanted to start the presentation with some of the basics, then discuss what could go wrong, so we covered a variety of examples of the kinds of problems people can encounter with their PCBs and their stackup. Next, we covered the physics of PCB layer stackup and how you solve those problems. We talked about some of the areas when communicating to get a certain type of board built. Then, we went in to some of the costs and different problems.
To read this entire article, which appeared in the January 2019 issue of Design007 Magazine, click here.
Suggested Items
Happy’s Tech Talk #27: Integrated Mesh Power System (IMPS) for PCBs
04/08/2024 | Happy Holden -- Column: Happy’s Tech TalkA significant decrease in HDI substrate production cost can be achieved by reducing the number of substrate layers from conventional through-hole multilayers and microvia multilayers of eight, 10, 12, and more to only two layers. Besides reducing direct processing steps, the yield will increase as defect-producing operations are eliminated. The integrated mesh power system (IMPS) was invented in the latter years of MCM-D use for thin-film fabrication. Those geometries fit today into our use of ultra HDI.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Now Available: Episode 4, Season 2 of Designing for Reality—Lamination
04/04/2024 | I-Connect007I-Connect007 has just released the latest episode of its podcast series, On the Line With..., which focuses on designing for reality in the electronics industry. Multilayer boards bring along a completely different set of processes. In this installment, ASC Sunstone VP/Manager Matt Stevenson discusses manufacturing techniques for multilayer boards. Of course, this necessitates a review of drill and registration techniques, followed by the ins and outs of lamination.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Kioxia, WD Elevate Capacity Utilization, Pushing NAND Flash Supply Growth to 10.9%
03/19/2024 | TrendForceTrendForce reports that anticipation of NAND Flash price hikes into Q2 has motivated certain suppliers to minimize losses and lower costs in hopes of returning to profitability this year.