Global Fab Equipment Spending to Rebound in 2020 with 20% Growth
June 12, 2019 | SEMIEstimated reading time: 2 minutes
Global fab equipment spending will rebound in 2020, growing 20% to $58.4 billion after dropping 19% to $48.4 billion in 2019, according to the Q2 2019 World Fab Forecast update published by SEMI, the global industry association representing the electronics manufacturing and design supply chain.
The 2020 investment increase is a downward revision from the 27% growth forecast earlier this year, and the 19% drop in 2019 spending is deeper than the previously projected decline of 14%. Despite the healthy gains forecast for 2020, fab spending will still fall $2 billion short of 2018 investments.
Memory sector spending alone is expected to account for a disproportionate share of the 2019 falloff, dropping 45%, but should stage a strong recovery of 45% to $28 billion in 2020. The 2020 increase in memory investments would mark year-over-year growth of more than US$8 billion and drive an overall expansion in fab spending. However, compared to 2017 and 2018 spending levels, 2020 memory investments will be considerably less if the forecast holds.
In two countertrends to the memory spending falloff this year, foundry sector investments are projected to increase by 29%, with micro growing by over 40%, fueled by the 10nm MPU launch. It’s important to note that overall micro spending is dwarfed by foundry and memory investments.
The World Fab Forecast update tracks investment projects of 440 fabs and lines from 2018 to 2020. A review of the SEMI data by half year (Figure 1) shows that memory spending will drop 48% in the first half of 2019, with investments in sector components 3D NAND and DRAM plunging 60% and 40%, respectively.
Figure 1: Fab equipment spending by half year from 2018 to 2020
Despite this staggering drop in one sector, overall spending in the first half of 2019 will be partially offset by a 40% increase in investments by leading foundries. With MPU its key driver, micro spending is expected to grow 16% in the first half of the year and another 9% in the second half.
The SEMI World Fab Forecast report covers new, planned and existing fabs as well as fab spending for construction and equipping, capacity expansion, and technology nodes by quarter and by product type with more than 1,300 front-end fab listings. Since its previous publication in February 2019, 192 updates have been made to the report including the addition of 14 new facilities and lines.
About SEMI
SEMI connects more than 2,100 member companies and 1.3 million professionals worldwide to advance the technology and business of electronics design and manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, devices, and services that enable smarter, faster, more powerful, and more affordable electronic products. Electronic System Design Alliance (ESD Alliance), FlexTech, the Fab Owners Alliance (FOA) and the MEMS & Sensors Industry Group (MSIG) are SEMI Strategic Association Partners, defined communities within SEMI focused on specific technologies.
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.