-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
3D Optical Inspection Provides ‘Eyes’ for Process Improvements in Industry 4.0
June 21, 2019 | Jenny Yuh, Koh Young Technology, and Brent Fischthal, Koh Young AmericaEstimated reading time: 3 minutes
Automated 3D solder paste inspection (SPI) and 3D automated optical inspection (AOI) systems have become an integral part of the printed circuit board assembly (PCBA) process because they help ensure high-quality production. As today’s board complexity is increasing, inspection technology becomes even more critical.
For example, while talking with Janet Tomor, senior business development manager at Suntronic Inc.—a contract manufacturer with facilities in Richardson and Houston, Texas—I-Connect007 Managing Editor, Nolan Johnson asked, “Streamlining must be something you talk about a lot [at Suntronic].”
Tomor replied, “The biggest impact for us has been automating almost everything except for putting your through-hole connector on the board by hand. We’ve automated most of our inspection and have improved quality. We went from 60% yield on our PCBA lines to 98.9% by adding automated 3D inspection from Koh Young.”
Tomor’s team also added 3D SPI equipment, continuing, “I’ll give you an example. We have a solder paste inspection machine on every line. We once put on a stencil, and it wouldn’t pass. The cause was that the stencil was too thick and applied too much solder paste. We would have had parts sliding all over the board because of the excess solder paste. That was a huge discovery and a change we made thanks to our SPI.”
While most manufacturers base quality decisions on a “good-bad” comparison of reference images, these decisions are easily influenced by variables like surface finish, board condition, component proximity, and more. However, data generated from 3D measurement systems provides meaningful insights about the process and helps manufacturers identify and eliminate the root causes of a defect. When manufacturers trust the data from the system, this helps to transform their operations and accurately control and monitor the PCBA process. What are the requirements of an inspection system to move from inspection to measurement, and ultimately to process control and optimization? Simply stated, the systems must satisfy the three “Rs” for measurement data: reliable, repeatable, and relatable.
When Johnson asked Tomor which equipment they were using to automate inspection, her answer was straightforward: “Koh Young.”
Reliable
Koh Young’s implementation of full 3D coverage monitors performance to detect common defects, such as missing or wrong components, and accurately identifies other issues, such as coplanarity and lead bridging. By measuring components and solder joints, and then offering critical height information to the inspection algorithms, contract manufacturers can use reliable measurements to identify errors during the production process. For example, after Suntronic adopted Koh Young 3D inspection solutions, their yields increased into the high 90% range, which has helped to transform their operations. But what’s next?
How can they continue to improve? Tomor further commented, “We also have a post-reflow AOI after the oven tells us if anything shifted. It uses true 3D technology, so it can measure if the part is skewed, missing, shifted, tombstoned, etc. Between the Koh Young SPI and AOI solutions, we increased our yield.” When asked what else helps with streamlining the assembly process, Tomor simply stated, “New equipment helps a lot.”
That new equipment solution, though, pays off by prioritizing data over raw throughput. Global competition means that manufacturers place challenging demands on process solutions. Manufacturers want to monitor and adapt the process to achieve zero defects by accessing all of the data anytime, anywhere. Moreover, manufacturers want process optimization. 3D inspection solutions have been instrumental in providing better data in the form of body and lead tip measurement, allowing the new equipment to quantify shape, coplanarity, solder amount, etc.
To read the full article, which appeared in the June 2019 issue of SMT007 Magazine, click here.
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.