NETGEAR Showcases Breakthrough AV-Over-IP Applications During Integrated Systems Europe
February 11, 2020 | NETGEAR, Inc.Estimated reading time: 2 minutes
NETGEAR®, Inc., the leading provider of networking products that power businesses both large and small, is presenting the latest advances in AV-over-IP networking in Amsterdam at the Integrated Systems Europe (ISE) Conference Feb 11-14 in booth 15-U320. The ISE show is the world’s largest exposition for audio video (AV) equipment and systems integration with over 80,000 attendees from all around the globe.
“We are happy to be able to accelerate the AV-over-IP transition while making things easier for the integrators. Our certified solutions provide valuable innovations offering an integrated solution that works for any AV deployment from small to extra-large,” remarks Richard Jonker, VP of SMB Product Line Management at NETGEAR.
Pre-configured 100G switches for large AV-over-IP projects and flawless quality
The new M4500 switches are engineered for AV-over-IP installations with NETGEAR IGMP Plus™ for an unparalleled ease of use right out of the box. Zero-touch multicast using Layer 2 commands without the need for more complex PIM (Protocol Independent Multicast) routing along with the 100G bandwidth and ultra-low latency makes these switches not only a better, but also more affordable choice than traditional data-center class products.
Two M4500 models provide a choice of 32- or 48-port configurations. The M4500-32C is offered with 32-port QSFP28s preconfigured for 100G and can support 40G QSFP+ and 50G QSFP28 optics or DAC cables. The M4500-48XFC is offered with 48-port SFP28s preconfigured for 10G, with 8-port 100G QSFP28 uplinks, and the SFP28 ports can support 10G and 25G.
Larger projects using high-end ethernet switches as the centerpiece often require complicated networking topologies. NETGEAR is here to help with a dedicated Pro AV Engineering Services team for system design and troubleshooting—at no additional cost.
Integrated M4500 management from iMAG Systems and Aurora Multimedia
New for ISE, NETGEAR is demonstrating the ability to run third-party AV-over-IP control and management software directly on the M4500 switch. For Software Defined Video over Ethernet (SDVoE) systems, running Director from iMAG systems or IPBaseT Manager from Aurora Multimedia right on the switch eliminates the need for a separate controller unit, resulting in a simpler system design with fewer points of failure. Additionally, Aurora’s ground-breaking ReAX™ IP Control software allows the full power of IP-based control automation with just the M4500 switch.
NETGEAR switches now certified by more than a dozen AV vendors
Advancing the reach of NETGEAR solutions to more of the Pro AV community, NETGEAR switches are now certified by over a dozen companies, including AMX SVSI, Atlona, Aurora, Biamp, Broadata, Christie, Crestron, DVI Gear, Just Add Power, Kramer, Megapixel, PureLink, Savant, tvONE, and ZeeVee. These certifications ensure that NETGEAR switches, central to any AV-over-IP solution, perform up to the highest industry standards.
With the advances in all types of AV over IP, more and more of the Pro AV industry is realizing the need for a simple, yet powerful network switch. NETGEAR is leading the way in simplicity and affordability with an unparalleled focus on the market. Stop by the ISE show and see for yourself at ISE booth 15-U320.
Suggested Items
KIC’s Miles Moreau to Present Profiling Basics and Best Practices at SMTA Wisconsin Chapter PCBA Profile Workshop
01/25/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, announces that Miles Moreau, General Manager, will be a featured speaker at the SMTA Wisconsin Chapter In-Person PCBA Profile Workshop.
The Drive Toward UHDI and Substrates
09/20/2023 | I-Connect007 Editorial TeamPanasonic’s Darren Hitchcock spoke with the I-Connect007 Editorial Team on the complexities of moving toward ultra HDI manufacturing. As we learn in this conversation, the number of shifting constraints relative to traditional PCB fabrication is quite large and can sometimes conflict with each other.
Standard Of Excellence: The Products of the Future
09/19/2023 | Anaya Vardya -- Column: Standard of ExcellenceIn my last column, I discussed cutting-edge innovations in printed circuit board technology, focusing on innovative trends in ultra HDI, embedded passives and components, green PCBs, and advanced substrate materials. This month, I’m following up with the products these new PCB technologies are destined for. Why do we need all these new technologies?
Experience ViTrox's State-of-the-Art Offerings at SMTA Guadalajara 2023 Presented by Sales Channel Partner—SMTo Engineering
09/18/2023 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is excited to announce that our trusted Sales Channel Partner (SCP) in Mexico, SMTo Engineering, S.A. de C.V., will be participating in SMTA Guadalajara Expo & Tech Forum. They will be exhibiting in Booth #911 from the 25th to the 26th of October 2023, at the Expo Guadalajara in Jalisco, Mexico.
Intel Unveils Industry-Leading Glass Substrates to Meet Demand for More Powerful Compute
09/18/2023 | IntelIntel announced one of the industry’s first glass substrates for next-generation advanced packaging, planned for the latter part of this decade.