Right Climate for Battery Testing
May 5, 2020 | UnitempEstimated reading time: 2 minutes
Electric vehicles are widely regarded as the future. But while bold targets are in place for the UK and the EU to transfer its transport fleet to electric propulsion by 2035 or 2040, there needs to be substantial evolution of the technology before we get there.
MAHLE Powertrain is one of the companies at the forefront of accelerating the development process, and has consequently recently opened a facility specifically for the testing and development of electrified powertrain battery packs and modules.
The aim of this new facility, which is based at the company’s Northampton UK headquarters, is to expedite the validation and testing of new battery technologies, parts and assemblies and therefore reduce the time and cost of the development process.
One established method of accelerating the testing procedure is to be able to precisely control the testing environment, rapidly cycling the temperature and humidity within a test chamber. As these climate-controlled chambers are key to the success of the operation, MAHLE Powertrain turned to expert Unitemp, who is the exclusive UK distributor of Espec environmental test equipment. For this battery cell evaluation project the Espec Platinous Series PL-3J test chamber was selected.
This chamber, like all others from Espec, meets the (European Council for Automotive R&D) EUCAR level 6 standard. This means that it will withstand fire, gas venting and ‘energetic release of materials’, which is reassuring when dealing with new battery chemistries that have unknown and potentially dangerous behaviours when subjected to the ‘real-world’ type testing simulated in the environmental chambers. Beyond meeting these stringent requirements, the Espec chambers were also selected for their energy efficient operation and the large amount of test space available in relation to the footprint of the machine.
Now MAHLE can take battery cells, modules and packs and safely assess their performance in terms of storage, thermal characteristics and electrical response under test conditions replicating the on-road and under-the-bonnet experience, as temperatures can be cycled from -40?C up to 100?C and humidity is always tightly and consistently controlled.
Having such a test facility alongside the existing manufacturing facility enables rapid prototyping for new battery technologies, from basic battery chemistries to full electronically-managed systems.
Simon Reader, MAHLE Powertrain’s director of engineering services, says: “With electrification, seemingly the automotive industry’s preferred method for achieving stringent future emissions targets, there is a very time- and cost-sensitive need to develop enabling technologies such as the battery module.
“The new facility has been carefully developed to provide an extensive capability that aids battery assessment, test and optimization. In-house development of such a facility would be time- and cost-prohibitive for OEMs and so it makes perfect sense for MAHLE Powertrain, which can provide an end-to-end powertrain solution, to offer a broad range of expertise and capability that’s able to accelerate development time while reducing cost, in one place.”
“The significant investment into this facility reflects MAHLE Powertrain’s commitment to providing customers with services and solutions that are directly relevant to their requirements,” concludes Reader. “The needs of the automotive industry are evolving and by working with a trusted powertrain partner for testing or development work, OEMs are able to combat challenges while streamlining new vehicle development processes.”
Suggested Items
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
Three Industry Leaders Receive IPC President’s Award
04/17/2024 | IPCIn recognition of their leadership and significant contributions of time and talent to IPC and the electronics industry, three IPC volunteers were presented with the IPC President’s Award at IPC APEX EXPO in Anaheim, Calif., on April 9, 2024.
Yamaha to Showcase Latest-generation Assembly Equipment and Software Tools at SMTconnect
04/16/2024 | Yamaha Robotics SMT SectionYamaha Robotics SMT Section will team with its distributor ANS Elektronik to showcase innovations for high-speed surface mount assembly at SMTconnect 2024.
TT Electronics Awarded Contract with Kongsberg Defence and Aerospace
04/11/2024 | TT ElectronicsTT Electronics, a leading provider of global manufacturing solutions and engineered technologies, announced today that its Fairford UK business has been awarded a new contract with long-standing customer Kongsberg Defence and Aerospace (Kongsberg) for the production of complex cable harness solutions.
Infineon, Amkor Deepen Partnership and Strengthen European Supply Chain for Semiconductor Solutions
04/10/2024 | InfineonInfineon Technologies AG, a leader in power systems and IoT, is strengthening its outsourced backend manufacturing footprint in Europe and announced a multi-year partnership with Amkor Technology, Inc., a leading provider of semiconductor packaging and test services.