Research: Thin-Film Lithium Niobate Photonic ICs are Scalable, Cost-Effective
August 25, 2020 | Business WireEstimated reading time: 2 minutes
Scientists from HyperLight, a leader in the commercialization of lithium niobate (LN) integrated optical circuits, have teamed with Harvard University researchers to achieve a significant technical milestone for photonic integrated circuits (PICs). For the first time, ultrahigh performance LN PICs are demonstrated to be compatible with mass production technologies. LN PICs produced at large scale with high performance and low cost using HyperLight technology, will alleviate bottlenecks in data center and telecommunications networks, while minimizing energy consumption.
In their manuscript entitled “Wafer-scale low-loss lithium niobate photonic integrated circuits,” published in Optics Express on August 17, 2020, the team consisting of Kevin Luke, Prashanta Kharel, Christian Reimer, Lingyan He, and Mian Zhang from HyperLight and Marko Loncar from Harvard, demonstrated monolithic LN PICs fabricated on 4- and 6-inch wafers. Using deep ultraviolet lithography and smooth and uniform etching, the team achieved 0.27 dB/cm optical propagation loss on wafer-scale allowing efficient light guiding on this material.
Unlike traditional circuits, PICs relay information signals through light, not electricity. In integrated electronics, silicon is the dominant and perhaps the best material. In integrated photonics, silicon is also widely used but the performance of silicon photonic devices are limited by this material’s non-ideal properties. On the contrary, LN is commonly used for realization of high performance optical devices due to its superior material properties that allow efficient and high speed conversion of signals from electrical to optical domains. Until recently, all previous LN work was done using slow serial lithography techniques. For LN to reach its true potential, large scale, silicon-like fabrication technology is needed.
“By making high performance LN PICs at scale we demonstrated that these devices are not only limited to high-end applications but allow for mass production at competitive price points. Our disruptive technology will have a very broad impact on performance and cost sensitive technologies such as data center networking, 5G radio communication systems and automotive LIDAR.” said Kevin Luke, lead author, co-founder and Head of Manufacturing of HyperLight. “LN PICs in recent years showed drastically better electro-optic performance than their silicon counterparts, despite decades of optimization of silicon photonics. But LN PICs’ manufacturability fell far behind silicon photonics, which is leveraging all of the existing infrastructure of the CMOS transistor industry. In this work, we show that you really can have the best of both worlds - performance and scaling using only standard CMOS fab tools, making LN a serious candidate for future PICs,” added Luke.
“Large scale integration of ultra-low loss and very fast optical components in LN, demonstrated by HyperLight, will enable novel applications such as reconfigurable and programmable photonic neural networks. Such PICs will allow for unprecedented control of temporal and spectral properties of photons, which is essential for realization of photonic quantum computers,” said Marko Loncar, co-founder and Chief Sciences Advisor of HyperLight and Tiantsai Lin Professor of Electrical Engineering and Applied Physics at John A. Paulson School of Engineering and Applied Sciences, Harvard University.
Previous performance milestones and technical achievements related to LN PICs frequency were achieved with research findings published in Optica (2017), Nature (2018, 2019), Nature Photonics (2019) and Nature Communications.
HyperLight was formed in 2018 and received seed investment from The Engine, MIT’s venture capital firm. HyperLight is pioneering the commercialization of LN PICs and has served many industrial and academic customers with applications spanning datacom, telecom, quantum, sensing and LIDAR in the US and around the world with ultrahigh performance LN PICs since its inception.
Suggested Items
Intel Announces New Program for AI PC Software Developers and Hardware Vendors
03/27/2024 | Intel CorporationIntel Corporation announced the creation of two new artificial intelligence (AI) initiatives as part of the AI PC Acceleration Program: the AI PC Developer Program and the addition of independent hardware vendors to the program.
SEMI 3D & Systems Summit To Spotlight Trends In Hybrid Bonding, Chiplet Design And Environmental Sustainability
03/26/2024 | SEMILeading experts in 3D integration and systems for semiconductor manufacturing applications will gather at the annual SEMI 3D & Systems Summit, 12-14 June, 2024,
Ventec to Launch New Bondply Dielectrics and Value-Added Services at IPC APEX EXPO 2024
03/26/2024 | Ventec International GroupVentec International Group is to reveal new products for advanced signal integrity and thermal performance, and introduce services, during IPC APEX EXPO 2024, April 9-11 on booth # 4309.
RTX's Raytheon Lower Tier Air, Missile Defense Sensor Detects and Engages Complex Target
03/25/2024 | RTXRaytheon, an RTX business, announced that its Lower Tier Air and Missile Defense Sensor, or LTAMDS, continues to advance through its U.S. Army test program with another successful live-fire event. Military leaders from seven nations were on-site to witness the radar's capabilities and performance first-hand.
IMAPS Wrap-up: AI, Chiplets, and 3D Cube Architecture
03/22/2024 | Marcy LaRont, PCB007 MagazineThe International Microelectronics Assembly and Packaging Society, IMAPS, held its 20th Device Packaging Expo and Conference this past week in Fountain Hills, Arizona, followed immediately by a ‘Workshop on Advanced Packaging for Medical Electronics’ that continued through the remainder of Thursday. Fortunate to find myself in Texas earlier in the week, I made it for the last day of the IMAPS event and attended two excellent keynote presentations by AMD and Intel, respectively. Here are some highlights.