Random Numbers Faster, From a Laser
March 1, 2021 | William Weir, Yale UniversityEstimated reading time: 3 minutes
To speed things up, a team of researchers has developed a compact laser that can produce these random numbers 100 times quicker than the fastest current systems. The results are published February 26 in the journal Science.
To foil would-be hackers, computer systems need to generate sequences of random numbers. Some systems use what’s known as pseudo-random numbers, which are actually complex patterns that begin with a particular number, or “seed.” They work fine for some applications, but if attackers know the seed or any part of the algorithm, they can get past the encryption. Other systems employ true randomness, often relying on such unpredictable phenomena as an atom’s radioactive decay, in which the timing of the decay is measured with a Geiger detector and then converted to random bits. These also have their drawbacks, such as low speed and high cost.
“Usually, those physical random number generators are not very fast — that’s one problem,” said Yale’s Hui Cao, the John C. Malone Professor of Applied Physics and professor of physics and of electrical engineering, who led the study. “Also, they are sequential — that is, they usually just generate one bitstream. They cannot generate many bitstreams simultaneously. And in each stream, the rate is relatively low, so that prevents it from generating a lot of random numbers very quickly.”
Cao and the research team designed a special type of semiconductor laser to generate randomness. The unpredictable properties of lasers have been used to generate random numbers before, but those systems relied on the lasers’ chaotic temporal dynamics, which were caused by introducing feedback. However, the frequency of the fluctuations is limited by the response time of the material, which in turn limits the number of random bits those systems can produce.
Cao and her collaborators tailored their laser cavity to amplify many optical modes simultaneously. These modes will interfere with each other to generate rapid intensity fluctuations, which are recorded by a fast camera. The fluctuations at different locations are then digitized to generate many random bit streams in parallel, which translate to random numbers.
Cao compared the hourglass-shaped device to a violin which is formed specifically to amplify sound and resonate with many acoustic frequencies. Similarly, the new laser cavity acts as a resonator for optical waves and amplifies many modes of light
In all of these modes, the spontaneous emissions — caused by quantum fluctuations — make the bitstreams unpredictable, creating a massively parallel, ultrafast random bit generator. The result is a system that can generate about 250 terabits, or 250,000 gigabits, of random bits per second — more than two orders of magnitude higher than the fastest current systems. It’s also energy-efficient and can be scaled up significantly.
Having demonstrated that this new physical process can be used for this purpose, Cao noted that there’s still much more to study.
“It really opens a new avenue on how to generate random numbers much faster, and we have not reached the limit yet,” she said. “As to how far it can go, I think there’s still a lot more to explore.”
The researchers will next work on making the technology ready for practical use by creating a compact chip that incorporates both the laser and photodetectors. At that point, the random numbers could be fed directly into a computer.
In addition to Yale, the work is a collaboration of researchers from Université de Lorraine in France, Nanyang Technological University in Singapore, and Trinity College Dublin in Ireland. Co-authors of the study are Kyungduk Kim, Stefan Bittner, Yongquan Zeng, Stefano Guazzotti, Ortwin Hess, and Qi Jie Wang.
Read the original article, here.
Suggested Items
Lockheed Martin Successfully Transitions Long Range Discrimination Radar To The Missile Defense Agency
04/23/2024 | Lockheed MartinThe Long Range Discrimination Radar (LRDR) at Clear Space Force Station in Clear, Alaska, completed DD250 final acceptance and was officially handed over to the Missile Defense Agency in preparation for an Operational Capability Baseline (OCB) decision and final transition to the Warfighter. In addition, prior to this transition, the system has started Space Domain Awareness data collects for the United States Space Force.
Real Time with... IPC APEX EXPO 2024: AI Implementation at Omron
04/18/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Omron Product Manager Nick Fieldhouse discuss the company's focus on AI implementation to enhance customer experience and results. They address programming challenges and how AI can help customers achieve better outcomes with less experience. Omron's AI is compatible with existing systems, facilitating easy upgrades.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Australian Flow Batteries and The SCHMID Group Announce Groundbreaking Memorandum of Understanding
04/17/2024 | SCHMID GroupAustralian Flow Batteries Pty Ltd (AFB), a leader in innovative energy solutions and economical, safe, and reliable power storage, and SCHMID Energy Systems GmbH a company of the German SCHMID Group, a global technology leader with a rich history in delivering innovative solutions across multiple industries including Electronics, Renewables, and Energy Storage sectors, are thrilled to announce the signing of a Memorandum of Understanding (MoU)
Ansys Joins BAE Systems’ Mission Advantage Program to Advance Digital Engineering Across US Department of Defense
04/16/2024 | ANSYSAnsys announced it is working with BAE Systems, Inc., to accelerate the adoption of digital engineering and MBSE across the Department of Defense (DoD).