Printed Electronics in Perspective
August 27, 2014 | Joe Fjelstad, Verdant ElectronicsEstimated reading time: 1 minute
Printed electronics have garnered a significant amount of press coverage over the last several years. What appears to have precipitated the explosion of interest in the middle of the last decade was a report that suggested that printed electronics would dominate electronic production by the mid-2020s with an annual market of over $300 billion. $300 billion is a big number and it not surprisingly captured a lot of attention. Since that announcement there has been a significant paring down of the market expectations to a number closer to one quarter the one projected earlier. It is, one can perhaps safely assume, an acknowledgement of the persistence of incumbent technologies. It seems clear to many knowledgeable observers that the potential of printed electronics was much more modest than early projections, but as Yogi Berra observed and has been often quoted, “Predictions are hard to make, especially about the future.”
The hyperbole surrounding the reports released in 2007 was met with some bemusement by those such as this writer, who having been first been involved in what would be called direct write printed electronics startup (using today’s broader definition) in 1990 had a different perception of the technology’s “newness.” Moreover, as one seeking to give credit where credit is due, it should be evident (if one puts in a bit of effort and does a little digging) that printed electronics is a technology that is arguably more than six decades old, thus predating my earlier company’s efforts by some 35 years.
The very first printed electronic circuits were called printed circuits because they were exactly that…printed, using conductive and resistive inks. Moreover, Xerox’s technology (then called the Haloid-Xerox Company) was applied to printing etch-resistant films for circuit production in the mid-1950s and more than 45 years ago, there was demonstration of a printed transistor in roll-to-roll fashion by Westinghouse.
Read the full article here.
Editor's Note: This article originally appeared in the August 2014 issue of SMT Magazine.
Suggested Items
IPC Bestows Posthumous Hall of Fame Award to Industry Icon Michael Ford
04/18/2024 | IPCIPC honored the late Michael Ford, Aegis Software, for his extraordinary contributions to the global electronics manufacturing industry with the IPC Raymond E. Pritchard Hall of Fame Award at IPC APEX EXPO 2024. IPC’s most prestigious honor, the Hall of Fame Award is given to individuals who have provided exceptional service and advancement to IPC and the electronics industry. Ford, an industry leader and valued IPC volunteer, died suddenly in January 2024.
SEMI Applauds U.S. Chips Act Award for Samsung Electronics Facilities to Strengthen Domestic Semiconductor Supply Chain
04/17/2024 | SEMISEMI, the industry association serving the global electronics design and manufacturing supply chain, applauded the United States Department of Commerce’s announcement of a Preliminary Memorandum of Terms for an award under the CHIPS and Science Act to support the expansion of Samsung Electronics’ presence in Texas and the company’s development and production of leading-edge chips.
Northrop Grumman honors Calumet Electronics with Supplier Excellence Award
04/17/2024 | Calumet ElectronicsNorthrop Grumman Corporation has recognized Calumet Electronics during the company’s 2024 Supplier Excellence Awards for “exceptional performance and unwavering commitment to delivering with excellence.” Calumet is one of 70 suppliers recognized from across the globe. In its award category of “Supplier Strategic Excellence,” Calumet was honored alongside global corporations such as Amazon Web Services, Dell Technologies, and Eaton Corporation.
Ark Electronics Expands Global Manufacturing Factory Network in North America and Europe
04/17/2024 | PRNewswireElectronic Manufacturing Company Ark Electronics recently announced the expansion of its Global Factory Network with the addition of Electronics Manufacturing Service (EMS) capabilities in Mexico and Europe.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.