-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
A High-Reliability, Stress-free Copper Deposit for FPC, Polyimide and Rigid-Flex
June 10, 2015 | J. Carver and A. Kucera, OM Group Electronic ChemicalsEstimated reading time: 2 minutes
Today’s wide variety of laminate materials and specialized dielectric choices pose a challenge for process engineering. In particular, smooth surfaces, such as polyimide, flex circuit substrates and rigid-flex constructions with window cut-outs, can be a challenge for electroless copper and plating processes. Conventional electroless copper systems often required pretreatments with hazardous chemicals or have a small process window to achieve a uniform coverage without blistering. To overcome the challenge of metallizing smooth surfaces, a new stress-free electroless copper was developed to serve this important sector of the printed circuit industry.
Introduction
As the thermal, physical, chemical and electrical properties of PCBs have advanced, so too have the substrates of construction. With a wide variety of substrates available, it is becoming increasingly difficult to accommodate these new substrates in current manufacturing processes[1]. Polyimide resins (PI), for example, provide exceptional thermal and chemical stability but remain challenging with industry standard processes.
In particular, electroless copper deposition, the most commonly used method of metallizing a nonconductive substrate, is susceptible to blistering or peeling due to the low adhesion of the copper film to the substrate. Typically, electroless copper films require mechanical anchoring to provide adhesion to a substrate to prevent blistering. A roughened surface is commonly created with a chemical or plasma etch process to help create anchoring sites.
Conventional chemical etches, which were primarily designed for epoxy substrates, are generally ineffective at activating PI substrates. Plasma etching, which is effective at etching PI, is still insufficient to prevent peeling and blistering. Some manufacturing processes have resorted to using an alkaline solution containing hydrazine. While this can be effective at improving adhesion of electroless copper films, hydrazine is extremely hazardous and challenging to handle safely. In addition, many material types, such as those that contain adhesive bonding layers, are incompatible with strong alkaline solutions.
Due to the fact that most surface treatments are ineffective, or not practical or compatible in some situations, it is critical that the electroless copper process provides a significantly wide processing window to alleviate blistering defects and accommodate a variety of substrate types.
The most common commercially available electroless copper plating solutions are not designed to meet these requirements. It is known that blistering and peeling of the copper deposit is also a function of the internal stress and strain of the deposit and that additives can be included in an electroless copper solution that affect the properties of the resulting electroless copper deposits (5–7). However, inclusion of additives may affect PCB reliability and careful selection is necessary. In this study, we evaluate select additives in an electroless copper system for their influence on the deposit stress and, ultimately, their effect on the reliability of a PCB by thermal shock and interconnect stress test (IST).
Editor's Note: This article originally appeared in the June 2015 issue of The PCB Magazine.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.