Nanocrystalline Thin-film Solar Cells
July 14, 2015 | KITEstimated reading time: 2 minutes
The efficiency of perovskite-based solar cells was improved significantly in the past years. On the way towards maturity, however, some challenges remain to be mastered. Researchers of Karlsruhe Institute of Technology (KIT) seek to advance the development of perovskite solar cells. By means of special thin-film processes, for example, material consumption and costs can be reduced. An interdisciplinary team of scientists will study solutions for the production of the new photovoltaic components under the “NanoSolar” project in the next three years.
Perovskite-based solar cells experienced an unprecedented development in the past years. Within only five years, their efficiency was increased considerably. Meanwhile, they convert more than 20% of solar irradiation into electric power. Low material costs and small amounts of material required – thanks to the thin-film technology – make perovskite solar cells a promising alternative. Costs for the conversion of sunlight into electric power can be reduced. A major drawback of the technology, however, is the use of environmentally harmful lead compounds for the production of the perovskite crystals. “We are looking for a way to apply non-toxic materials ,” Dr. Alexander Colsmann says. He heads the Organic Photovoltaics Unit of the KIT Light Technology Institute (LTI). The physicist points out that perovskite solar cells might not only be suited for large-scale electricity production, but also for decentralized power supply, if sustainable and environmentally friendly production processes can be established. “Thin-film solar cells have a very homogeneous appearance and, hence, can be used as facade cladding, for instance,” Colsmann says. He emphasizes that development of environmentally friendly perovskite solar cells is not only required for sustainability reasons, but also a major prerequisite for their economic success.
The project “NanoSolar – Kontrollierte Abscheidung von Nanokristallen für Perowskit-Solarzellen” (NanoSolar – Controlled Deposition of Nanocrystals for Perovskite Solar Cells) is carried out by scientists of the LTI unit of Dr. Alexander Colsmann and of the Institute for Inorganic Chemistry (unit of Professor Dr. Claus Feldmann). The interdisciplinary team consists of physicists, chemists, material scientists, and engineers. They want to specifically adjust nanoscaled crystal structures and to develop novel, environmentally friendly materials and processes for the production of perovskite and its integration into solar cells.
The researchers study the complete process from the synthesis of the materials to the demonstrator module, i.e. a functioning solar cell. Similar to organic solar cells, the perovskite solar cells are produced by printing and coating processes. “NanoSolar” combines fundamental research with application-oriented science. To understand the fundamentals of the new technology, the scientists study and optimize the structure-property relationship of the materials. The “NanoSolar” project is scheduled for a duration of three years and supported with EUR 530,000 by the Baden-Württemberg Foundation under the research program “Funktionelle Oberflächen und Materialien für eine nachhaltige Energieversorgung” (Functional surfaces and materials for sustainable energy supply).
About Karlsruhe Institute of Technology (KIT)
Karlsruhe Institute of Technology (KIT) is a public corporation pursuing the tasks of a state university of Baden-Wuerttemberg and of a national research center of the Helmholtz Association. The KIT mission combines the three core tasks of research, higher education, and innovation. With about 9,400 employees and 24,500 students, KIT is one of the big institutions of research and higher education in natural sciences and engineering in Europe.
Suggested Items
IDTechEx Explores the Role of 3D Cu-Cu Hybrid Bonding in Powering Future HPC and AI Products
04/18/2024 | PRNewswireSemiconductor packaging has evolved from traditional 1D PCB levels to cutting-edge 3D hybrid bonding at the wafer level, achieving interconnecting pitches as small as single micrometers and over 1000 GB/s bandwidth. Key parameters, including Power, Performance, Area, and Cost, are crucial considerations
Intel Brings AI-Platform Innovation to Life at the Olympic Games
04/18/2024 | BUSINESS WIREIntel announced its plans for the Olympic and Paralympic Games Paris 2024. Bringing AI Everywhere, Intel will implement artificial intelligence technology powered by Intel processors on the world’s biggest stage.
Adura Solutions Exhibits at Del Mar 2024
04/18/2024 | Adura SolutionsSumit Tomar, CEO of Adura Solutions, has announced that his company will be exhibiting at this year's Del Mar Electronics and Manufacturing Show to be held at the Del Mar Fairgrounds, San Diego, California, April 24-25.
Australian Flow Batteries and The SCHMID Group Announce Groundbreaking Memorandum of Understanding
04/17/2024 | SCHMID GroupAustralian Flow Batteries Pty Ltd (AFB), a leader in innovative energy solutions and economical, safe, and reliable power storage, and SCHMID Energy Systems GmbH a company of the German SCHMID Group, a global technology leader with a rich history in delivering innovative solutions across multiple industries including Electronics, Renewables, and Energy Storage sectors, are thrilled to announce the signing of a Memorandum of Understanding (MoU)
Ansys Joins BAE Systems’ Mission Advantage Program to Advance Digital Engineering Across US Department of Defense
04/16/2024 | ANSYSAnsys announced it is working with BAE Systems, Inc., to accelerate the adoption of digital engineering and MBSE across the Department of Defense (DoD).