Seika Machinery Debuts MALCOM VDM-2 Video Capture System


Reading time ( words)

Seika Machinery, Inc., a leading provider of advanced machinery, materials and engineering services, introduces the MALCOM VDM-2 Video Capture System. Used in conjunction with MALCOM Reflow Simulators, the VDM-2 camera system captures video of the simulated reflow process.

The VDM-2 includes a video mixer that overlays the temperature/time/profile data over the video to make it easy to track important points during reflow. It receives real-time, temperature, wettability, profile and other data from MALCOM Reflow Simulators compliant with the VDM-2. Data is overlaid onto the video feeds taken by the video camera(s) in real-time.

The built-in scale function measures the displayed object. Up to two CCD cameras can be connected, enabling the VDM-2 to display up to two video feeds at the same time. This makes it possible to observe samples from multiple angles.

About Seika Machinery, Inc.

Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

Share

Print


Suggested Items

Mirtec's Approach to Raw Data: The 'Sushi Principle'

12/09/2019 | Real Time with...productronica
Editor Pete Starkey and Brian D’Amico discuss the company’s new Alpha system, designed for the automotive market. D’Amico explains why Mirtec is focusing on providing customers with raw data instead of “cooked” data, what he terms the “sushi principle.” He says that the system is able to pick up tiny defects that would otherwise be filtered away if the system were not using raw data. D’Amico also discusses their use of artificial intelligence, and some of the possible benefits from using AI going forward.

Explaining the QSFP-DD Data Center Interconnect Standard

11/05/2019 | Scott Sommers, Molex
According to Cisco’s report, most IP traffic either originates or terminates in data centers. Yet as massive as the flows between centers are becoming, the data managed within those same facilities is going even higher. All of this activity means that “hyperscale” is the word of the future. Roughly one-quarter of all servers installed in 2016 went to hyperscale facilities, but that number will grow to almost one-half by next year.

Discover the Benefits of a Technology Center

10/23/2019 | Barry Matties, I-Connect007
Nico Fahrner, application engineer at Rehm Thermal Systems, talks with Barry Matties about the benefits prospective customers get from being able to fully test their systems in-line at Rehm’s technology centers before purchasing.



Copyright © 2019 I-Connect007. All rights reserved.