Engineered Material Systems Debuts DF-3050 Dry Film Negative Photoresist


Reading time ( words)

Engineered Material Systems, Inc., a leading global supplier of negative photo resist materials for MEMS and IC cooling applications, is pleased to introduce the DF-3050 Dry-film Negative Photoresist for use in micro electro mechanical systems (MEMS) and wafer-level packaging applications (TSV sealing). This material formulation has been optimized for hot roll lamination and processing on MEMS and IC wafers.

DF-3050 is available in other thickness formats from 5 to 50um, ±5 percent. The cured chemistry can withstand harsh environments including resistance to extreme moisture conditions and corrosive chemicals. The DF-3050 film is tougher (less brittle) than most negative photoresists on the market with a glass transition temperature of 158°C (By DMA Tan Delta) and a moderate modulus of 3.5 GPa at 25°C. It is hydrophobic in nature providing for chemical and moisture resistance. DF-3050 is compatible with and can be used in contact with the EMS line of spin coatable photoresists.

DF-3050 is the latest addition to Engineered Materials Systems’ full line of film and liquid negative photoresists formulated for making microfluidic channels on MEMS devices and integrated circuits.

For more information about the DF-3050 Negative Photoresist or to learn how Engineered Materials Systems can define, develop and create an engineered material solution that is right for your company, visit www.emsadhesives.com.

About Engineered Material Systems

Engineered Materials Systems, Inc. (EMS) technology focus is on electronic materials for semiconductor, circuit assembly, photovoltaic, printer head, camera module, disk drive and photonics assembly product lines. The company creates continual improvements that will guide its customers into the future.

Share

Print


Suggested Items

Conformal Coatings

08/01/2019 | Nolan Johnson, I-Connect007
While conformal coatings may have been something of an afterthought at the front of the design process, that can no longer be the case. Conformal coatings are now a critical part of any board assembly that might be subjected to challenging conditions. But coatings can also contribute to increased mean time between failure in any conditions, even environmentally controlled environments.

How Do I Get Smart With IPC CFX? (Part 1)

07/30/2019 | Michael Ford, Aegis Software Corp.
Today's assembly factories are seeing the biggest challenge to face the industry in a generation, called by many the next industrial revolution. However, in essence, the challenge is a simple extrapolation of trends that have been occurring and increasing in assembly manufacturing for decades. In Part 1 of this two-part article, Michael Ford writes about the history behind the drive for automation in the SMT assembly industry and where CFX fits in.

Clean vs. No-clean Solder Process

07/03/2019 | Russell Poppe, JJS Manufacturing
Although IPC suggests clear guidelines, agreeing on the cleanliness (or otherwise) of a PCB assembly can often be a subjective and even contentious subject within the electronics manufacturing industry. If you’ve chosen to outsource your assemblies, how do you decide what to specify to your EMS partner? Find out here.



Copyright © 2019 I-Connect007. All rights reserved.