Movies, Mars Missions and Why Murphy Was An Optimist
October 13, 2015 | NASAEstimated reading time: 3 minutes
If Murphy’s Law were actually true, things would arguably be much easier.
The old adage that “Anything that can go wrong will go wrong” has a reputation of being the apogee of pessimism, but think about how much simpler it would make things if it were true. Spaceflight is full of unknown possibilities, and if Murphy’s Law were really true, you’d only have to prepare for the worst of them.
It’s true for a college exam and it’s true in life or in engineering – it’s not the hard questions that will get you, it’s the ones you never imagined you’d be asked.
There’s a movie out now that captures the spirit of that. “The Martian” tells the story of Mark Watney, an astronaut on Mars who, to put it lightly, gets the opportunity to learn about what can go wrong in space exploration, and his survival depends on working with the NASA team back on Earth to answer questions none of them had ever imagined.
In many ways, “The Martian” is a spiritual successor to “Apollo 13,” both the 1995 movie and the 1970 NASA mission on which it was based. On that mission, a failure in an Apollo service module put the lives of the crew in jeopardy, and only through quick thinking, hard work and a lot of endurance was the crew able to survive.
Both movies are edge-of-your-seat stories about the risks of spaceflight and the merits of duct tape, but while one is fiction and the other is based on a true story, they both are ultimately, in a very real way, stories about NASA — about who we are, and about how we rise to the challenge of answering those unexpected questions.
I’ve talked to engineers who have cited Apollo 13, both the mission and the movie, as something that inspired them to pursue engineering. There’s a scene in the movie where a collection of the items aboard the spacecraft are dumped on a table on Earth, and the engineering team is challenged to use them to figure out how to put a square peg in a round hole. More than one person has told me they saw that scene and said, “THAT’S what I want to do!”
The Apollo 13 mission has been described as being perhaps “NASA’s greatest moment.” I talked once with an astronaut who said this title should really go to a 10-day span in May 1973. When the Skylab space station launched on May 14, its first crew was supposed to follow it on the next day. An anomaly during launch caused the heat shield to be lost and the solar power system to be crippled, endangering the space station. In 10 days, NASA figured out multiple ways to save Skylab, designed and built two different solutions, and was able to launch the first crew on May 25. Apollo 13 was primarily a story of a crew and mission control, but the Skylab rescue was a nationwide effort.
You may never see a movie about the Skylab rescue. The world may pay more attention when lives – real or fictional – are in danger, but answering the unknown is something we do every day. When we do it successfully, it means that we prevent those lives from being endangered in the first place.
It made me happy that one of the first conversations I had with a coworker about “The Martian” wasn’t about what was right or wrong with the movie, but what could have been done differently to make sure the situation it depicts never happened in the first place. On a program developing a new vehicle, our job right now isn’t solving Apollo 13- or The Martian-style problems, it’s preventing them.
Which doesn’t mean we don’t have challenges on the Space Launch System program. We prepare for the worst and we prepare for the best and sometimes we get the unknown. A material doesn’t function in reality the way it does on paper. A proven system behaves differently in a new environment. And when that happens, just like in those movies, we roll up our sleeves and we find an answer to the unexpected question.
And the moments when we do, the moments you never see in movies when we make sure the next Apollo 13 never happens or the next Mark Watney is never stranded on Mars – THOSE are NASA’s greatest moments.
Suggested Items
Blackfox Ready for IPC APEX EXPO 2024
03/26/2024 | Andy Shaughnessy, I-Connect007Blackfox Training Institute offers IPC-certified training for a myriad of PCB assembly techniques and standard certifications. With many technologists beginning to eye retirement, this training is at a premium. I recently spoke with Jamie Noland, director of training and education for Blackfox, about the company’s latest educational efforts, and his plans for the upcoming IPC APEX EXPO, where Blackfox will be exhibiting.
Seeking Employment: Meet Gary Turner
03/25/2024 | Barry Matties, I-Connect007Meet Gary Turner, a recent graduate from the University of Texas at Dallas with a bachelor’s degree in mechanical engineering and a master’s in material science and engineering. He is currently seeking employment in the industry. The following interview will allow you to learn about Gary and see if he might be a good candidate for a position you are looking to fill.
It’s Only Common Sense: Get to Know Your Customers
03/18/2024 | Dan Beaulieu -- Column: It's Only Common SenseNo matter what business you are in, understanding your customers is crucial if you want to thrive. You must have a complete understanding of who they are, their business, and what it takes to be successful. In short, you have to see things from their perspective. Too often, we assume we know who our customers are and what they want, but without the proper research and vetting, we can be wrong, which can really send us on the wrong path when it comes to accurately providing them exactly what it is they need from us, our products, and our services.
The Shaughnessy Report: The Myriad Opportunities—and Challenges
03/12/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportIf you look at the current state of PCB design, there are a lot of positive indicators. We have almost full employment in this great career that appeals to the techie side of the brain as well as the artistic side. You can make good money as a designer without ever seeing the inside of a college. This segment is in constant flux. It’s challenging, and that’s part of what makes it fun. But there’s one big problem: There aren’t enough designers, and the problem is likely to get worse before it gets better.
Dan Beaulieu: It’s All About the Customer Experience
03/11/2024 | Nolan Johnson, PCB007Dan Beaulieu is an industry expert in sales and marketing who understands the unique dynamics of working in both B2B and B2C efforts. Through his work with companies across the electronics manufacturing industry, Dan advocates for businesses to always deliver a top-notch customer experience. Customer experience may not stop world wars—or might it? Read on to get a perspective that only Dan Beaulieu can deliver.