Flex Talk: Thoughts on the IPC Flexible Circuits–HDI Forum
November 19, 2015 | Tara Dunn, OMNI PCBEstimated reading time: 4 minutes
As an attendee at the IPC Flexible Circuits–HDI Conference held October 28–30, I found myself in a room full of people, all eager for technical information, with the opportunity to reconnect with industry friends and to make new connections. The audience was diverse with young people, new to our industry, sitting alongside industry veterans willingly sharing their knowledge and passion for HDI design and flexible circuit technology. The conference kicked off with intermediate level, half day tutorials on both flexible circuit design and HDI. The second and third days provided advanced level speaker presentations in 45-minute segments allowing time to digest the information, speak further with the presenters and network with industry peers.
Two comments made early in the technical conference solidified an event message in my mind. Event Chair Mike Carano, with RBP Chemical Technology, commented in his opening remarks that networking is one the greatest opportunities available with IPC. Brad Bourne of FTG gave the keynote presentation, “Organizational Commitment to High Reliability.” He presented the message that PCB reliability goes way beyond the manufacturing of the printed circuit board. Everyone in the industry impacts reliability: circuit board designers, raw material suppliers, fabricators, contract manufacturers and end users of the product.
Following the opening keynote, we were treated to a presentation by Andrew Schimmoeller and Jeffrey Friend of the Battelle NeuroLife Project. Their riveting presentation explained the use of flexible circuits in the design of a neurological stimulation system that re-animated a paralyzed hand, controlled by patient thoughts. I have re-watched the short video on this topic several times since the event. This is an inspiring example of the things our industry can accomplish by working together.
Throughout the conference, there were several presentations addressing flex and rigid-flex, including: design rules for flex performance, high-reliability flex and rigid flex, flex vs. flexibility and new developments in HDI technology. Beyond fabrication and design related information, we also learned of unique challenges with flex and rigid-flex in terms of stack up and impedance, reducing fabrication challenges with new materials, metallization for HDI and flex circuit technology. The amount of relevant technical knowledge disseminated in a short time period was staggering. I was continually reminded of the power of the combined knowledge of our speakers.
While many of the presentations detailed proven technology, reliability data and design criteria, we also learned of exciting emerging technologies including the latest developments in thin film metallization and via filling and a novel new approach for applying metallization to ultra-thin substrates. It will be interesting to follow these new technologies and see how they develop over the next few years.
Page 1 of 2
Suggested Items
The New Chapter: Attracting ‘Generation Green’
03/28/2024 | Hannah Grace & Paige Fiet -- Column: The New ChapterIn the electronics industry, we talk a lot about sustainability in terms of recruitment and retention of the next generation of engineers. But what if the key to sustaining the industry long into the future is through the more common definition of the word? What if, for just a moment, we think about sustainability in terms of the environment and what we as an industry are doing to care for it? Because, if you weren’t aware, Gen Z cares tremendously about the environment and the actions companies are taking to preserve it. Without Gen Z joining the electronics industry’s workforce, we won’t be able to sustain the industry for much longer.
Accenture Invests in Sanctuary AI to Bring AI-Powered, Humanoid Robotics to Work Alongside Humans
03/27/2024 | BUSINESS WIREAccenture has made a strategic investment, through Accenture Ventures, in Sanctuary AI, a developer of humanoid general-purpose robots that are powered by AI and can perform a wide variety of work tasks quickly, safely and effectively.
Don Dennison Appointed to Roll Out KIC’s Latest Thermal Analysis System Software in the Northeast
03/26/2024 | KICKIC, a renowned pioneer in thermal process and temperature measurement solutions for electronics manufacturing, is pleased to announce the appointment of PIT Equipment Services, LLC, led by Don Dennison, as its representative for New York, New Jersey, and Eastern Pennsylvania.
iNEMI/IPC White Paper on Complex Integrated Systems Highlights Future Technology and Manufacturing Ecosystem Needs
03/25/2024 | IPCToday’s system solutions combine more varied functionality, such as digital, analog, optical, micro-mechanical, etc., packed into smaller form factors. As a result, electronics manufacturing has to deliver increasingly complex integration of diverse technologies with system designs that blur the distinction between chip, package, board, and assembly.
Seeking Employment: Meet Gary Turner
03/25/2024 | Barry Matties, I-Connect007Meet Gary Turner, a recent graduate from the University of Texas at Dallas with a bachelor’s degree in mechanical engineering and a master’s in material science and engineering. He is currently seeking employment in the industry. The following interview will allow you to learn about Gary and see if he might be a good candidate for a position you are looking to fill.