All About Flex: Embracing the Mess
December 3, 2015 | Dave Becker, All FlexEstimated reading time: 5 minutes
Marketing in the world of printed circuits is an important discipline, but I have learned it is better to be prepared with a nimble reaction than to expect the marketing department to consistently be successful in predicting the future. The path to the goal is often achieved much more quickly by making an early decision followed by a course correction rather than waiting for all the information. Several related factoids characterize the markets for flexible circuits and flexible heaters:
- We live in a world of “time based competition.” Being faster to market can be more profitable than being better.
- Customers’ needs many times don’t fit within the supplier’s existing/proven/Six-Sigma capabilities.
- Technology and markets move quickly, rewarding suppliers that respond rapidly.
- Customers give suppliers money to figure things out.
The myriad of electronic applications drive flexible circuit product configurations and constructions spanning broad engineering imaginations. Circuits that require controlled impedance push trace widths down, and copper thicknesses increasingly thinner, with .0007” copper a common specification. These applications also tend to drive film substrates thicker to increase separation distance between signals and ground planes. Circuitry intended to carry heavy current pushes copper the opposite direction, sometimes involving metal thicknesses in excess of .010”. These circuits tend to stretch the definition of the word flexible
Product configuration selections can also involve adding copper layers to make multilayer structures, plating multiple surface treatments for solder pads vs. switch contact regions, attaching selective stiffeners for mechanical and component support, and orientation of copper grain to properly orient circuit traces in applications requiring dynamic flexing. Requirements for optimizing component attachment create an additional complexity dimension as nesting circuits for material usage competes with assembly panelization requirements. These seemingly endless permutations of “want to have” vs. “need to have” requirements can drive mushrooming product features, untested manufacturing processes, and unique routing sequences. It can tax the creativity of the best product and applications engineers. What a mess!
But it is a wonderful mess. Complexity makes sourcing parts overseas, across multiple time zones and language barriers, a very risky proposition. The world of flexible circuit manufacturing involves custom engineered parts with unique performance requirements. Every application is different. The kiss of death on most any part number is when someone states the circuit is a “no brainer.” When I hear this, it is generally time to get material ready for a restart. In an attempt to deal with the mess, the manufacturer is tempted to “standardize” their offering, often defined by comfortable or existing manufacturing capabilities. Isn’t the solution to stop building the oddball parts? Or define a niche product offering so resources can be focused? Maybe, but the business world is littered with companies that have disappeared because they were too restrictive in their willingness to change. Attempting to put in systems or procedures to deal with the complexity is noble, and existing procedures always deserve challenge, but new rules and procedures should be considered as part of a continuous improvement project rather than an end state. Change takes us out of our comfort zone, it is difficult…and often it is absolutely necessary.
Determining when engineering resources should be invested in a new application is certainly a tightrope walk. But stretching capabilities, investing in capital, and being aggressive are often requirements to staying relevant. And engineers can be pretty ingenious. Often the investment is more a clever technique rather than a new technology. Embrace the mess is a message requiring serious consideration. What does that mean? How can this be done? There are some basic principles.
First, management needs to communicate the business plan. Let employees know where you are going and how you expect them to get there. This needs to be done at a 10,000-foot level; it cannot be overly prescriptive. Goals for on-time delivery, scrap reduction, targeted customers, etc., are examples. Historical performance data helps provide context. The management message should indicate a general direction, but the specifics of execution will change as situations evolve. The best decisions are usually made by those employees closest to the problem—but only if they understand what the company is trying to accomplish and the direction the organization has targeted.
Page 1 of 2
Suggested Items
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.
TE Connectivity Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/09/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that TE Connectivity has finalized the purchase of a Pulsar solderability testing system.