All About Flex: Process Controls for Flexible Circuit Fabrication
December 17, 2015 | Dave Becker, All FlexEstimated reading time: 1 minute
Manufacturers of flexible circuits use several chemical processes for fabrication. These processes are generally located in a common area of the plant because of facility requirements and environmental considerations. These chemical operations are referred to as wet processes. Some of the specific processes that would be characterized as wet process in circuit fabrication:
• Develop-etch-strip: Photosensitive resist is developed so the unneeded resist is washed away, leaving a pattern of resist that defines the circuitry. The subsequent etching operation removes the base metal (normally copper) that has been exposed by the patterned resist. The last step is to remove (strip away) the resist that defined the circuitry.
• Copper plating: This is typically an electro-chemical operation. Metal is electrodeposited onto the base metal surface thereby creating a thin, robust coating. Electroplating of copper is the most common example and is used to create electrical connection between traces on the top and bottom of the insulating dielectric film.
• Shadow plating: A laminate of metal-dielectric-metal is initially drilled, punched, or laser ablated to form the vias. In order to initially create an electrical connection between the layers of metal, the dielectric must be coated with a conductive material. Shadow plating coats graphite inside a via and is a chemical process commonly used by flexible circuit manufacturers.
Each of these operations relies on chemical reactions, which may be supplemented with mechanical agitation, temperature and voltage/current. In most cases the chemical makeup is the most critical element that affects the output. It is vital that critical process parameters are tightly controlled to assure desired results. The following are the basic outputs that are monitored and compared to a process or customer specification:
- Trace width and spacing
- Metal thickness
- Via integrity
- Metal composition
To read the full article click here.
Editor's Note: This article originally appeared in the November 2015 issue of The PCB Magazine.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.