-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Lost in the System: How Traceability can Solve the Problem of Counterfeit Materials
January 15, 2016 | Michael Ford, Mentor Graphics Valor DivisionEstimated reading time: 3 minutes
The word "counterfeit" encompasses a wide range of activities that are happening continuously in an "underground” SMT supply chain. The risks and potential effects resulting from the use of counterfeit materials can be huge, threatening human life, as well as the success of any company in the electronics industry. Word on the street is that the occurrence of counterfeit materials is growing rapidly, which means, at some point, a critical mass will be reached. The best managers and engineers among us must surely realize that now is the time to get proactive on this issue before a serious compelling event occurs. Let's play detective and investigate this dark side of manufacturing to try and find out what exactly can be done.
The classic plot of any detective story is the task of discovering the motive, means, and opportunity for the crime. In business, the motive is focused on the financial aspects of materials supply. After all, materials generally are 80–90% of the cost of a finished product. As manufacturing costs decrease, the material costs become more significant. For example, shaving a cent or two off the cost of material in each product can be significant when scaled up to the level of materials used in high-volume consumer products. At the other end of the scale, many individual materials have a high enough value to be a target for counterfeiting even when used in lower volumes.
As well as the physical properties of the materials, test and qualification processes add value to a material, differentiating it from otherwise identical materials. In critical applications, materials that have not been through prescribed testing or have not been handled in an approved way are disqualified from use.
Motivation
As a result of these pressures, the motivation to reduce material costs can encompass:
• Vendor cloning: There are many choices of materials manufacturers, and some have better quality or consistent products, which are also more expensive. The golden rule is to select the level of quality needed at the lowest price available. Substituting lower cost materials in volume, however, can make a considerable financial difference.
• Test failures: In testing materials during manufacture, some will inevitably fail. Electrical properties may fall outside of control parameters, or stress testing may reveal weaknesses. These failures create an opportunity for individual materials, groups of materials, or even a whole batch of materials to be scrapped or re-packaged as cheaper versions. This may not represent a huge cost to the original manufacturer, but the opportunity to make some extra money could be a significant motivation to anyone else involved in disposal or recycling.
• Trial materials: Materials made during the setting up of manufacturing processes, or samples generated, could also be intercepted in the disposal process and re-sold.
• Dirty materials: It is not only in the material manufacture and supply-chain process that counterfeit materials can be introduced. Spoilage generated during assembly production can also be inappropriately used. For example, materials that have been rejected by the SMT processes and discarded may be gathered up and recycled back into the machine at a later time. The handling of these materials outside of the supply-chain rules introduces risk of contamination from dirt and water. In many situations, refurbishing materials is acceptable, but in a situation where an acute shortage of materials happens at the end of a production run because of unexpectedly high spoilage can be a great motivator to simply pick up discarded materials and put them in a tray for re-use. These are also counterfeit because they deviate from the approved supply procedure.
• “Garage” materials: Some materials are made specifically with the intent to replace authorized materials. The classic situation is an entrepreneur who buys an out-dated manufacturing process that he sets up in a garage to churn out materials made with substandard raw materials, often without testing. The intent is simply to make the materials as cheaply as possible and then find a way to introduce them as genuine materials in the supply chain.
Editor's Note: This article originally appeared in the January 2016 issue of SMT Magazine.
Suggested Items
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
Checking In With ICAPE Group
04/03/2024 | Nolan Johnson, I-Connect007ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.