High-Performance Laminates
February 17, 2016 | Karl Dietz, Karl Dietz Consulting LLCEstimated reading time: 1 minute
For the purpose of this column, high-performance laminates are characterized as base materials that in one or more aspects exceed the performance of FR-4, CEM, or paper/phenolic laminates. The focus, however, is on low loss (Df), low Dk dielectric resin-based CCLs and prepregs. Included are laminates that distinguish themselves through higher Tg, better chemical stability, better dimensional stability, or some other performance factor. Polyimide-based flex laminates are covered briefly. Requirements for dielectrics specifically developed for HDI boards or flip chip packages, such as dielectric films for microvia build-up layers, laser-drillable prepregs, and various forms of RCC for rigid cores, are briefly mentioned to contrast these requirements to high-performance CCLs for second level packaging.
Market Overview—Applications
The applications for high-performance laminates are quite diverse and evolving rapidly. Low Dk and/or Df are common performance requirements in addition to many others that are shared with various applications. The high-performance laminate applications include:
• Cellular base station infrastructure (e.g., base station power amplifiers)
• LNBs (low-noise block down-converters)
• Cavity PCBs
• HF antennas
• High-speed digital backplanes
• High-speed routers
• High-speed servers
• High-speed test PCBs
• RF and HF microwave boards and modules
• High-speed chip packages
• Optoelectronic devices
• Satellite TV infrastructure
• Automotive collision avoidance systems
The automotive collision avoidance applications appear to be the highest frequency application at 40 GHz and above (current state-of-the-art radar chip systems, 77 GHz), and have a very high growth rate. It also demands dielectrics with very low loss.
Following is a list of commercial high-performance laminate constructions/compositions, as provided by the manufacturers:
• Woven E-glass/PPO
• BT/epoxy
• Woven E-glass/high-speed, low-loss epoxy
• Woven SI-glass, APPE thermoset resin
• Woven E-glass, ceramic filled thermoset hydrocarbon (polybutadiene)
• Woven SI-glass/high-speed, low-loss epoxy
• Woven glass, ceramic filled PTFE
• Woven glass, ceramic filled thermoset
Editor's Note: This article originally appeared in the January 2016 issue of The PCB Magazine.
Suggested Items
Arlon EMD and EMC Announce Expansion in California
03/25/2024 | Arlon EMDArlon EMD, a division of Elite Materials Company (EMC), announces a factory expansion at the Rancho Cucamonga, CA location. Arlon is a global leader in high performance thermoset substrates for mission critical printed circuit boards manufactured for high endurance and long-life programs. Arlon has a 45-year history of manufacturing specialty materials for the Aerospace, Industrial and Military (AIM) markets.
EMC, Arlon Industry Leading PWB Laminates at DesignCon 2024
01/29/2024 | EMCAt the DesignCon 2024 Expo, drop by EMC/ Arlon booth #1260 and learn from the experts with the results from a wide range of performance testing that some of our key OEM customers in almost all market segments of technology, have completed.
Designers Notebook: What Designers Need to Know About Manufacturing, Part 1
01/25/2024 | Vern Solberg -- Column: Designer's NotebookThe designer needs to have a working understanding of two key manufacturing operations: basic circuit board fabrication procedures and assembly process practices. For printed circuit board manufacturing, the number of steps required to produce the printed circuit board correlates to the circuit board's complexity. Greater process complexity in fabricating the circuit board equates to increased costs. To develop any portion of the electronic product, the designer must apply the design for manufacturing (DFM) principles established in the industry. In fact, DFM should always be the goal of the design engineer. It encompasses a wide range of disciplines that must be considered during the planning phase of any product.
Rogers Corporation Exhibiting at DesignCon 2024
01/24/2024 | Rogers CorporationRogers Corporation will exhibit at DesignCon in Santa Clara, CA (booth #609) highlighting some of its high performance circuit materials.
Shortage of Raw Materials Challenges CCL Market Amidst Strong Demand for Electronic Devices
11/13/2023 | Global NewswireThe "Global Copper Clad Laminates Market (by Type, Application, Reinforcement Material, & Region): Insights and Forecast with Potential Impact of COVID-19 (2023-2028)" report has been added to ResearchAndMarkets.com's offering.