Rex Rozario: The PCB Industry’s True Renaissance Man
March 14, 2016 | Barry Matties, I-Connect007Estimated reading time: 9 minutes
You may know Rex Rozario OBE, as a part of the team that developed the first circuit board in England in the 1950s, or for being the founder of Graphic PLC, which has been serving the industry for 50 years and achieved phenomenal, long-term success in China. What you might not know about are the many other lives of Rex: the successful restaurateur, the developer and co-owner of a marina voted best in the UK, and the drummer in a band called The Flintstones. As a matter of fact, in one of his past lives, Rex took drum lessons from Jim Marshall, of Marshall Amplifier fame. If you can’t tell already, Rex is cool.
In this exclusive I-Connect007 multi-part interview that was conducted recently, I will introduce you to all of the people that Rex Rozario is, and where he, his team, and Graphic PLC are headed to next.
Barry Matties: Rex you’ve been working with circuit boards for a long time. Please begin by explaining how you began in the PCB industry.
Rex Rozario: When I left Ceylon, which is now Sri Lanka, I went to England to finish my studies at two technical colleges, Reading and Acton, before graduating at Brunel with an electrical and electronics degree. While at university, I did odd jobs to keep the cash coming in and I got involved doing some work for a condenser company; I learned quite a bit about condensers. After I graduated, I found a very large condenser manufacturer not far from the university, called the Telegraph Condenser Company, and it employed about 3,000 people.
I applied and was offered a job as a lab technician because of my experience working part time on condensers. When I joined I had already paid for a vacation and they honored that. But when I returned, a guy was doing my job. He said that he had started the day I had left or whatever. So I assumed that because I was on vacation and I hadn't been there long enough that possibly I was fired and caught the bullet.
Then the manager wanted to see me. He said, “I'm glad you're here, come with me.” I asked where we were going and he said, "To the managing director’s office." Of course, this company employed 3,000 people and nobody ever saw the managing director. Nobody even knew what he looked like. I didn’t know what to expect. I walked into his office and there were six other guys sitting at the table. He started talking and said he had a new venture in mind and they had just acquired the license to manufacture. Here of course is where printed circuits came into the picture.
Then he had a phone call, and back then you didn't have mobile phones, so he had to dash off to the next office. I turned and asked the others, "What is he talking about?" They hadn't a clue. They said, "He keeps talking about printed circuits." He came back and said he was forming a team and we were part of this team. He introduced each person. They were all skilled. One guy, the most important guy, was a silkscreen specialist, another was a chemist, a mechanical engineer, photographer, etc. Those were the key people, and I was coming in now as a technician with my electronics degree.
Then we were given a shed across the road by rail lines, about 1,000 square feet I’d say, and that's it. We said, "Where do we start?" He said, "You don't have to worry." The license was bought from Dr. Paul Eisler who formed a company called Technograph. We were Telegraph, and we acquired the first license to manufacture, and he was brought in as a consultant. It was like the blind leading the blind. We didn't know where to start or where to get the materials from. Everything was done by trial and error and development. The first material was wallpaper material. We had to use this material, which was paper based, impregnate it with resin, buy the copper sheets and actually brush the adhesive onto that, stick it on, and then of course put it into a press. So from day one we had experience of how to use a heated platen press, and that's how multilayer technology came in, from day one. And then we had to print and etch.
Paul Eisler’s innovation wasn't very high tech. He used the graphic arts litho plate-making technology that used the same sort of printing as silkscreen or photo printing solutions. So that's how we started, with single-sided boards, and it was pretty straightforward.
(See historical video, next page.)
Page 1 of 2
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.