Elementary, Mr. Watson: The Five Pillars of Your Library, Part 1

Welcome to 2022. I hope you had a good holiday season, and from my family to yours I wish you all the best for the new year ahead.

I have recently had some great conversations with several readers, and the same question keeps coming up: What does it take to have an excellent component library? I’ve decided to kick off the new year by taking a deep dive into your PCB component libraries and looking in detail at the five pillars of your library. So, along with taking the tree and the decorations down and making your New Year’s resolutions, let's resolve to take an honest look at our component libraries and get them in order.

Importance of Component Libraries
I’m pretty sure we all understand the importance of our component libraries, yet nothing significantly impacts your company's success either as a profit resource or a significant financial loss. That’s because every product first begins in your library.

A sound library just doesn't happen; it takes a lot of know-how, work, and maintenance. Like everything else, our libraries are affected by Newton’s second law of thermodynamics: “There is a natural tendency of any isolated system to degenerate into a more disordered state.” That could not be truer than when working with so much information.

Static vs. Dynamic Libraries
In the early days of PCB layout, the libraries were very static with minimal information. We often copied the component, changed the value, and dropped it elsewhere in the schematic. That was the nature of the beast; as they say, the libraries were compartmentalized, separated schematic symbols and footprint with very little parameter information. Then as the industry demanded more information and electronic systems became more complex, the libraries had to transform to meet the need. The result was the integrated library concept. Within each component were various pieces of information and required models for that individual part. A significant improvement was the addition of part choices, which made the library dynamic and constantly changing. When a component is used in a schematic, we can pull any information needed, including manufacturers and suppliers. I would go so far as to say that our libraries have become a living, breathing resource for us.

This series of columns will look at the five pillars that must be a part of your library. Although every library is different, there will still be these five pillars. Using pillars is a common, useful analogy because it provides a unique watson_fig1.jpgmental illustration. The definition of a pillar is a tall vertical structure of stone, wood, or metal used to support a building, an ornament, or a monument.

First, pillars are placed to support a specific building section. To pull one out requires the remaining ones to hold the total weight above. So, the first lesson is each of these pillars is necessary for your library to succeed. You cannot choose which of them you intend to follow; to pull just one out results in the others toppling over.

Second, a pillar provide support for what is above it. What is that? First, the components. The quality of your PCB designs is only as good as the quality of your components in the library. So, these pillars will hold up and support your components and, ultimately, your PCB designs.

Five Pillar Overview
I included a relatively simple acronym to remember the five pillars. It is called the SMART rule.

S: Singularity          

M: Managed

A: Architecture

R: Review

T: Traceability

First Pillar: Singularity
The first pillar that stands before us is “singularity.” The singularity of what? A singularity of data and process. Another way to phrase it is “a single source of truth.” 

No matter the size of your design team, if they are working from different data as their starting point, it doesn't take a psychic to determine the results of that one. There is absolutely no way to control the results. It is like multiple people starting at different locations, going in different directions, each having another map, and expecting them to end up at the same place.

watson_fig2.jpgThe PCB library should be the sole source of all truth. Have you ever noticed this? When someone is dishonest, we say, "That person told a lie," which is plural. However, when someone is honest, we say that a person told the truth. Why is that? Well, there are endless things that can be incorrect about something, but only a single and correct solution: many lies but only one truth. 

I have seen time and again the problems directly caused by what I call "rogue libraries." They are libraries of components that are not managed, verified, or controlled. Consider the massive amounts of work necessary to prepare a PCB design. The engineering, layout, fabrication process, followed by assembly and the notorious, unwanted phone calls letting you know that the assembly house was hitting "snags." These problems could be anything ranging from parts not going onto the PCB because of wrong footprints to component tombstoning or falling off entirely when you start to investigate the issue, only to find that someone used their own personal "rogue library.” It usually results in a fatal error for the PCB design and scrapping the entire fabrication. At this point, you begin that long walk to the management office to explain the situation. That is never a good feeling. That library resulted in a lost profit for the company.

Several years back, I joined a company which was considered successful. However, the PCB design area had no structure or organization. As a result, there was a tremendous fallout of boards in both fabrication and assembly. The problem was evident when I remember going over to one of the designers, where he opened a desk drawer filled with bare PCB boards. They were piled up at least a foot high. He let me know that those designs did not make it through assembly due to some problem. When I looked back and put together the numbers (meaning the cost), the estimation of these failures for the PCB design area was around $750,000. It was like I got kicked in the gut by a mule. That was $750,000 that would not come back. It was wasted and gone.

When I investigated further, I determined there were 1,123 PCB libraries of all kinds, and with endless component information, symbols, and footprints. Moreover, probably none of them was correct. Each designer had a personal library. No wonder there were significant problems. The rule of cause and effect was alive and well.

The solution for that company was the first pillar—a single source of truth for everyone to work from. Once I deleted all 1,123 libraries (a story for another day), we immediately began to see improvements in our fabrication/assembly yield numbers.

If you are using multiple libraries right now, decide to take steps to migrate and unify all of them into your single source of truth. However, you will not be sorry to have that first pillar in place.

John Watson, CID, is a customer success manager at Altium. 

Download The Printed Circuit Designer’s Guide to… Design for Manufacturing by David Marrakchi. You can also view other titles in our full I-007e Book library here.


Back

2022

Elementary, Mr. Watson: The Five Pillars of Your Library, Part 1

01-13-2022

I have recently had some great conversations with many of you, and the same question keeps coming up: What does it takes to have an excellent component library? So, I have decided to kick off the new year by taking a deep dive into your PCB component libraries and looking in detail at the five pillars of your library. So along with taking the tree and the decorations down and making your New Year resolutions, let's resolve to take an honest look at our component libraries and get them in order.

View Story
Back

2021

Elementary, Mr. Watson: PCB Data Management and Security

12-12-2021

As a grandfather of six grandchildren, one of my great joys is spending time with them. There is nothing better than spending an afternoon at the park and especially playing on the teeter-totter. It's all fun and games until grandpa gets on one side, and they try to lift me. Then the harsh reality and a teachable moment in leverage, balance, and just how heavy grandpa really is hits pretty hard.

View Story

Elementary, Mr. Watson: We’ve Never Done It That Way Before

11-11-2021

The September edition of Design007 Magazine discussed the theme of collaborating and working with a team. In that issue, I wrote a feature article called “PCB Design Is a Team Sport.” After that edition was published, I had several follow-up questions and conversations with individuals; they agreed on the importance of teamwork but felt that it's easier said than done. It's challenging because of the inherent problem of team members accepting or handling change very well. Change it's a word that sends shivers down the spine of some. You know those sort of individuals. They're easy to identify. The ones that constantly remind everyone, "We never did it that way before." As if how we did things in the past was so much better.

View Story

Elementary, Mr. Watson: First, Component Shortages, and Now Hot Dogs?

10-14-2021

When I considered the title for this month’s article, I seriously considered calling it "From the Frying Pan Into the Fire" because I’m sure you’ve noticed recently that the component shortage problem has only worsened—we’re now seeing other supply lines breaking down.

View Story

Elementary Mr. Watson: PCB Design—It's a Team Sport

09-29-2021

One of the hard lessons of this past year was about the value of the team and collaboration. I have repeatedly heard how many of us have a newfound respect and appreciation for the teams we work with inside our companies. Out of necessity, we had to find new ways to collaborate.

View Story

Elementary, Mr. Watson: The Danger of Rogue Libraries

09-16-2021

For PCB designers, the most common part of the library is the collection of components used in the PCB design process. But, I have seen some libraries have other information, including a resource area, a group of documents, standards, and articles. So basically it can have anything you want.

View Story

Elementary, Mr. Watson: Epic Fails with Design Rules

08-12-2021

Various sciences, including physics, mathematics, chemistry, are significantly involved throughout the PCB design process, rules that can sometimes be bent but not broken. However, the rules that designers break and ignore altogether and very often are the design rules.

View Story

Elementary, Mr. Watson: Managing Risk in PCB Design

08-05-2021

PCB design is like bungee jumping. With the complexity of a PCB design, the intricate details, and various steps, it's rather easy to make mistakes. Those mistakes, many times, do not show up until it's too late and the board has gone off to fabrication and assembly. By the way, a good rule is not to use your assembly house as your quality control team for PCB designs.

View Story

Elementary, Mr. Watson: Time to Market, from Ludicrous Speed to Plaid

07-18-2021

Mel Brooks may have something to teach us about going "ludicrous speed" in getting our designs to the finish line. John Watson explains.

View Story

Elementary, Mr. Watson: Trust but Verify

06-10-2021

Over many years, I have seen some elaborate PCB library systems. However, the best ones were those not based on the size but rather the quality of the information. That old axiom is definitely “not quantity but rather quality.”

View Story

Elementary, Mr. Watson: Paying the Price To Be a PCB Designer

05-13-2021

Today, the electronics industry is flourishing with innovations and technologies. The result is that the “good” designers are left in the dust. Truthfully, our industry doesn't need more good designers; rather, we need great designers—those who can face any challenge and instead of cowering in the corner, looks at the task at hand and says, "Bring it on."

View Story
Back

2020

Elementary, Mr. Watson: Demystifying Bypass Capacitors

12-17-2020

As PCB designers, we work under the simple rule of cause and effect, and a PCB design can quickly become a petri dish for the butterfly effect to flourish. One of those areas that can quickly snowball into major problems is your PCB power distribution structure. When it goes wrong, it usually goes very wrong and has significant issues throughout your design.

View Story

Elementary, Mr. Watson: Density Feasibility Putting 10 Lbs in a 5-Lb Bag

11-18-2020

Whether on a customer, a system, or a PCB level, it’s essential to understand the final objective and how you intend to get there and meet the customer need at the forefront of any project. In this column, John Watson addresses density feasibility and more.

View Story

Elementary, Mr. Watson: Location, Location, Location

10-15-2020

When it comes to PCB design, one of the most overlooked principles is component placement. Similar to a home, the component location has a considerable impact on the quality and is the real value of a PCB design. John Watson examines five rules to follow when it comes to component placement.

View Story

Elementary, Mr. Watson: Overcoming PCB Designs Pitfalls

09-10-2020

When starting every PCB design, the hope is that we can navigate through any pitfalls that arrive. Unfortunately, many times, issues happen that you do not handle correctly; they fall through the cracks and end up in your PCB design. John Watson explains how that is when the real problems begin.

View Story

Elementary, Mr. Watson: How to Ruin Your PCB Design in 4 Easy Steps

08-06-2020

John Watson has seen firsthand how quickly PCB designs can “go off the rails” by not following a few simple principles. In this column, he looks at four practices that can easily ruin your PCB design.

View Story

Elementary, Mr. Watson: PCB Components Naming Conventions

07-09-2020

How you accurately analyze and identify certain information has a direct connection to the overall success of your PCB designs. In this column, John Watson focuses on the conventional naming scheme for the schematic symbol and footprint to prevent headaches and ulcers later.

View Story

Elementary, Mr. Watson: Collaboration in the PCB Design Process

06-11-2020

The past few months have been trying for everyone, with many of us working from home. However, there are still the underlining principles of collaboration to step into a role to finish the necessary tasks to keep a project moving forward. John Watson, CID, explains.

View Story

Elementary, Mr. Watson: Reinventing Yourself

05-28-2020

When COVID-19 first hit, many businesses were forced to close, and we immediately saw its impact on the service industry. Whatever challenge you’re facing, John Watson emphasizes that it’s time to hit the switch on reinventing.

View Story

Elementary, Mr. Watson: The Positive Side of COVID-19

04-16-2020

With the recent COVID-19 outbreak worldwide, most of us have been forced to reshuffle how we work, live, and play. Something like this has never happened before in our lifetimes, and it is scary and challenging, but difficult times develop resilient people. John Watson shares some of the positive things he has already noticed come out of this situation.

View Story

Elementary, Mr. Watson: Are We There Yet?

03-12-2020

Anyone who has taken a road trip with children knows the question, “Are we there yet?” very well. This question also applies to PCB design. If you are not careful, your PCB project could easily go off track and you could lose sight of what you are doing (objective), why (motivation), how (process), and when (schedule). John Watson emphasizes the importance of these fundamental questions.

View Story
Copyright © 2022 I-Connect007. All rights reserved.