The Best It’s Ever Been, Every Year: The Goal for IPC, Part 1
The end of 2017 caps an exciting time for IPC and IPC China as membership has grown substantially, in part because of new offerings from the organization to its Asian members. Meeting with Barry Matties at HKPCA, John Mitchell and Phil Carmichael discuss the areas of focus for IPC in the upcoming year, first and foremost being education and welcoming a new generation into the industry.
Cicor’s Approach to Miniaturization: Cost of Function, and More
Barry Matties spoke with Karl Heinz-Fritz, VP of technology, about Cicor’s newest product line, which can shrink the size of a circuit by up to 40%, and the importance of measuring the cost of functionality.
In Terms of Experience, a 10,000-foot View of China
In the past 30+ years of PCB manufacturing in China, you would be hard-pressed to find someone more connected to the pulse of the Asian market than Gene Weiner. Barry Matties met with the industry veteran at HKPCA to get his take on the show, the current and future market conditions of China, and any effect the new U.S. administration might have on trade relations going forward.
CES 2018, Augmented Reality and Much More
The actual CES show is spread across many locations in Las Vegas. The main exhibit halls are at or near to the Las Vegas Convention Center with three buildings, two floors each, all filled with hundreds of booths. Then there is The Sands Convention Center with multiple halls filled to the brim and hotels with their own convention centers and floors of exhibitor suites. With almost 200,000 in attendance, all locations are very busy.
Preview: CES 2018 Unveiled
The official CES events started only about 15 hours ago. I have already been to CES Unveiled, an amazing (but somewhat long) NVIDIA press event, and now the Panasonic press conference is soon to begin, launching the Press Day activities. So far, it’s been amazing!
Weiner’s World—December 2017
Hold on to your seats! 2018 will be a year full of rapid changes, surprises, and growth. M&A activities will flourish. The supply chain will suffer shortages and changes as demand increases, copycats will rush to market, and new markets and potential suppliers will vanish before they are established.
Automation and Traceability Critical for High-Throughput Probe Testing
Peter Brandt, atg’s director of sales for Europe, India and Japan, joined Barry Matties at productronica to share his views on regional variations in electrical testing requirements, automation, traceability, and how to anticipate and satisfy the future demands of the market. Group general manager Dr. Jochen Kleinertz also comments on the need for close cooperation with customers to guide the R&D effort.
Institute of Circuit Technology Harrogate Seminar 2017
A return to the historic spa town of Harrogate in Yorkshire, England for the Institute of Circuit Technology Northern Seminar, to enjoy a diverse programme of presentations on safety standards, research in selective metal deposition, and developments in imaging and inspection techniques.
HDI: Today, Tomorrow and the Future
For the November issue of The PCB Magazine, our editorial team interviewed some of the top HDI experts in the PCB supply chain. Joining us on the conference call were Steve Bird, PCB/flex technology manager at Finisar, and Tony Torres of APCT.
Video from productronica 2017: Rogers Discusses Trends Driving Growth
Dirk Lefelon, European sales manager for Rogers Corporation, discusses his group’s final 2017 results. He also explains what the new year will bring, including increased investment in capacity for the European market, especially for the automotive segment.
Happy Holden and Charles Pfeil Discuss the Past and Future of PCB Design, Part 1
When it comes to the PCB design community and the challenges facing it, as well as where design has been and where it’s heading, there aren’t many people as qualified to speak on the topic as long-time industry veterans Happy Holden and Charles Pfeil. Joined by I-Connect007’s Barry Matties at the recent AltiumLive 2017 event in San Diego, the three sat down for a discussion about the current state of PCB design, what the future holds, and what it means to be a designer.
New I-Connect007 Team Members Tour American Standard Circuits
Recently, Anaya Vardya, CEO of American Standard Circuits, invited two of I-Connect007’s newest team members, Editor Kiersten Rohde and IT coordinator Jonathan Zinski, to tour his facility in West Chicago, Illinois. Happy Holden, resident PCB expert, also joined the newbies on their field trip to ASC. In the following articles, Jonathan and Kiersten describe their experience touring ASC. Special thanks to Anaya for hosting the I-Connect007 team.
IPC Status Update: Training, Standards, and More!
At the recent IPC Fall committee meetings that are co-located with the SMTA International conference and show, IPC’s president and CEO, John Mitchell, sat down for a chat with me for an update on what’s happening at IPC.
Update on IPC’s Validation Services and Hints of What’s to Come
SMTA International is the perfect time to get updates on IPC happenings. One that I’m always curious about is the Validation Services programs. At the busy show, I managed to find a quiet spot so Randy Cherry, IPC’s director of Validation Services, could fill me in on the latest.
Patty's Perspective: (Signal) Integrity for All
Our topic this month is signal integrity, certainly a common one in our industry. Signal integrity is achieved by controlling impedance, so my advice is to do that. There, I’m done. Just kidding…of course I’m not done. But if you are in PCB manufacturing and you think this is just a design problem and doesn’t concern you, please think again.
The State-of-the-Art in PCB Pre-production Engineering
If there’s one benefit of old age, it’s being able to remember the introduction to our industry of technologies that may be taken for granted by the present generation, but were revolutionary at the time. I can recall the history of Ucamco as far back as the late 1980s when, as one of the very early adopters of the DISC laser plotter and its associated electronic PCB front-end tooling system, our company gained entry to a spectacular new world of pre-production engineering capability.
Patty's Perspective: How do You Define Process Step Elimination and Automation?
This month, we can call our theme PSE&A—a fancy acronym for process step elimination and automation. Sounds straightforward, but what exactly do we mean by “process step elimination?” Does it refer to shortening the numerous steps involved in making a printed circuit board? There sure are a lot of them, but they all must be necessary—or why would we have them?
Victory Giant Technology: The Qualified Forerunner of PCB Smart Factories
The topic of the July issue of PCB007’s China Online Magazine is “Automatic PCB Factories,” focusing on the pressures of cost, delivery time and process, and the irreversible trend toward automated PCB factories. Centering on this theme, we interviewed Andy Zhou, COO of Victory Giant Technology (HuiZhou) Co. Ltd., the first domestic PCB manufacturer who carries out large-scale implementation of intellectualization throughout the factory.
Catching up with Prototron Circuits Tucson GM Kim O’Neil
This has been an exciting year for Prototron, which has achieved Mil-PRF-31032 and gone into the flex business. Most recently, Prototron received word that they had achieved their AS9100 Rev D, which made me want to check in with Kim O'Neil and find out more.
IPC: Department of Labor Releases RFI to Seek Information on Overtime Regulations
This week, the Department of Labor (DOL) released a Request for Information (RFI) to gather additional feedback from the public on the overtime regulations, which define and delimit exemptions from the Fair Labor Standards Act’s minimum wage and overtime requirements for certain executive, administrative, professional, outside sales and other employees.
Embedded Technology: A Useful Tool in Freedom CAD’s Toolbox
Freedom CAD has been designing and fabricating boards with embedded technology for years, and doing some pretty innovative work along the way. I asked Scott McCurdy, Freedom CAD’s director of sales and marketing, to share some details about their embedded processes, as well as the challenges and opportunities that embedded technology offers.
The Skills Gap – Meet People Where They Are!
A perennial concern in the U.S. electronics manufacturing industry is the lack of skilled talent in many parts of the country. According to a recent IPC member survey, most companies have a hard time recruiting qualified production workers, engineers, and other technical professionals.
Patty's Perspective: What Happens in Washington Doesn’t Stay in Washington—It Reaches All of Us
I went to my second IMPACT Washington, D.C. event this year (May 1–3) and, as much as I applauded last year’s event, this one far surpassed it—just ask anyone who was there. In this month’s issue, a special section on IMPACT backs that claim.
Mr. Laminate Tells All: PTFE is About to be Banned by IEC TC111
There, I said it. Technical Committee 111 of the International Electrotechnical Commission (IEC) is preparing to effectively ban PTFE (polytetrafluoroethylene) materials from electronics. As history goes, the electronics industry has focused on only two of the four halogens (bromine and chlorine) to be limited in order to be called “halogen-free” or more accurately “low-halogen.” But now, fluorine is being dragged down too, just because of its location in the periodic table.
Rex Rozario, OBE, Wins Two Awards in Two Weeks
During their recent summer conference, the European Institute of Printed Circuits (EIPC) presented Rex Rozario with its distinguished Honourary Fellowship of the Institute Creditation for his contributions to the world electronics interconnection industry. Then at the Devon County Show, Rozario received the Pride of Devon Award for his contributions to Devon businesses and local radio.
The Significance of the PCB in the Value Chain of the European EMS Industry
At SMT Nuremberg, Pete Starkey meets with Dieter Weiss, who comments upon the significance of the PCB in the value chain of the European EMS industry, and looks to a future where we embrace an open-minded attitude and a willingness to work together.
Happy Holden Second Recipient of I-Connect007 'Good for the Industry' Award
Our second 'Good for the Industry' award has been presented to Happy Holden. After working with Happy for a number of years it is clear to see that he is dedicated to improving the industry. He has a long history in the PCB industry, starting off with HP in the '70s. Not only did he develop HDI, but he then wrote the HDI Handbook, which is provided to readers at no charge.
Global Impact on European PCB Fabrication: EIPC Summer Conference 2017, Day 2
The second day saw the conference room full once more, the late networking session in the bar having resulted in no significant casualties, and I was pleased to accept the invitation to moderate the first session, on processes and materials for flexible PCBs.
Global Impact on European PCB Fabrication: EIPC Summer Conference 2017, Day 1
Electronics industry professionals from 13 countries, mainly from Europe and Scandinavia, others from the USA, but some from as far away as India and Japan, gathered in Meriden, the centre of England, for the EIPC Summer Conference.
Embedded Technology: It’s All Around Us
In the early ‘80s, the PCB company I worked for was testing some of the first material for buried resistors. I can’t recall what customer it was for, or how far along the project got, but over the years it seemed like the technology was slow to be adopted and perhaps ahead of its time.
A Conversation with an Industry Twenty-Something
At a recent SMTA Expo, I met with Matt Hammesfahr, a salesperson with Amitron. Matt is young, by our industry standards—in his midtwenties. Just a few years out of college, Matt holds a business degree and is already a top salesman with the company. Here’s one of those twenty-somethings we keep saying we want to attract to our industry. How did this happen? I had to get the story.
HDP User Group 2017 European Meeting Highlights Technology Progress
The conference facility at the offices of Oracle, in the royal burgh of Linlithgow in West Lothian, Scotland, was the venue for the 2017 European meeting of the High Density Packaging User Group. I was delighted and privileged to be invited once again to sit in on the open session, an intense programme of technical presentations and discussions, project reviews, status updates and new project proposals.
How to Find –and Retain– the Right People for the Right Jobs
I sat down recently with Rebecca Brennan, director of human resources, and Aimee Miller, director of corporate communications for Compunetics and Compunetix. I already knew a little bit about their programs, having spent time at Compunetics in past years. I was looking forward to learning more about their methods.
Growth Ahead for Flexible Hybrid Electronics Industry
According to Zion Research, “global demand for the flexible electronics market was valued at $5.13B in 2015 and is expected to generate revenue of $16.5B by 2021, growing at a CAGR of slightly above 21% between 2016 and 2021.” Key elements of the market, in the view of most analysts, include flex displays, sensors, batteries, and memory.
Help Wanted With IMI’s Peter Bigelow
In preparation for this month’s topic, especially what companies in our industry are currently experiencing when it comes to finding and hiring the right people, I sought out Peter Bigelow, president and CEO of circuit board fabricator IMI Inc. We spoke in February at IPC APEX EXPO.
Deep Into Technology at Compunetics
There aren’t many printed circuit companies in my neck of the woods. There is one, however, that has always fascinated me, and that is Compunetics, in Monroeville, Pennsylvania, a suburb of Pittsburgh. Having worked with them on the electrophoretic photoresist, a PPG product, many years ago, it was great to stop by and catch up with CTO Tim Schmitt and Technical Applications Manager Jesse Ward, along with General Manager Burhan Capar, a relative newbie to the company.
Ding Cheng of BYD Electronic: Embracing the FPC Factory Model of the Future
The topic of the third issue of PCB007 China Magazine is "The Wide World of Flex." Around this theme, we asked one of the leaders of China's FPC industry, Ding Cheng, general manager of the FPC Division of Shenzhen BYD Electronic Parts Company, to share his perspective about trends in flex, and where he thinks that market is headed in the future.
Weiner’s World—April 2017
China’s economy accelerated for a second straight quarter as investment picked up, retail sales rebounded, and factory output accelerated in March. Gross domestic product increased 6.9% in the first quarter from a year earlier, compared with a 6.8% median estimate in a Bloomberg survey.
Innovating in the Technology of Stretchable PCBs
Express Circuits is a long-established PCB fabricator located in Coleshill, near Birmingham in the Midlands of England, specialising in quick-turn complex prototype and small- to medium-volume microvia multilayer and rigid-flex. With the benefit of associate companies focused on design and assembly, Express is recognised for its exemplary customer service and technical support, as well as for its innovative manufacturing solutions.
Material Choices for High-Speed Flexible Circuits
Materials to make high-speed flexible circuits are now available from many material suppliers. In deciding which materials to test or use, remember the tradeoffs the suppliers made in categories we discussed: electrical properties, mechanical/flex properties, and ease of processing. A choice should only be made after considering these options. Remember with any new materials it is very important to find fabricators that are knowledgeable about processing these new materials.
TTM Shines a Light on Optical Interconnect
Are embedded optics on PCBs set to make a breakthrough in the upcoming years? According to Dr. Craig Davidson, VP of Corporate Technology at TTM, it might be closer than you’d expect. In a recent interview with the I-Connect007 team, Craig outlines TTM’s current pursuit of high-volume manufacturing lines able to deliver embedded optical interconnect, what that would mean for the PCB industry, and why he thinks there will be manufacturing production capability by 2020.
Capitol Connection: IMPACT Update—To CEOs on Why You Should Attend IMPACT Washington, D.C. 2017
Here at IPC, we place a high priority on making our presence known in the halls of government, because so many policy debates have a direct effect on the electronics manufacturing industry. IMPACT Washington, D.C. 2017 is a chance to join with fellow industry executives in advocating for better public policies for a stronger, more advanced manufacturing economy.
Mutracx Makes Green Operations Economically Viable
During IPC APEX EXPO, I sat down for an interview with with Jeroen de Groot, CEO of Mutracx. He detailed the company’s plans to install new equipment at a facility in Romania, and he explains why having a green manufacturing operation is not enough—it must also be economically feasible.
Navigating the Complex World of Flex Circuit Assembly
We recently conducted a survey on flexible printed circuits to know more about the challenges that designers, fabricators, and assemblers face when dealing with flex circuits. We asked what steps in their processes have the biggest effect on yields; the challenge they face when dealing with flex circuit materials; as well as the factors that have the greatest impact on the quality of their flex circuit design, fabrication and assembly.
Weiner’s World – March 2017
The CPCA show held at the China International PCB And Assembly Show was moderately busy even though the new venue was not quite ready (no escalators, the "water closets" not fully finished, the heat was only on for a few hours one day). It showcased products for PCB Manufacturing, Electronic Assembly Materials and Manufacturing Services.
Ray Pritchard Looks Back at IPC’s Beginning and His Role in Getting it Started
I have known Ray Pritchard for a long time—as long as I’ve been involved with IPC, in fact. He directed the organization for 35 years before turning over the reins. One could say he grew up with the organization—or vice versa. Ray was always a bundle of energy and still is, still joking and warm, a great people person, and I am sure he had a little something to do with the spirit of camaraderie and cooperation that is the hallmark of the IPC we know today.
Capitol Connection: Direct Legislative Action—IMPACT Washington, D.C. 2017
This ties in to why IPC–Association Connecting Electronics Industries invests so much into our government relations efforts. We place a high priority on government relations because so many public policy debates have large impacts on our industry. Our members continue to value our advocacy efforts on issues such as taxes, regulations, immigration and the environment.
RTW CPCA Show 2017: ESI Discusses Latest Innovations in Laser Drilling
At the recent CPCA Show 2017 in Shanghai, China, Mike Jennings, director of marketing for flex and interconnect products at Electro Scientific Industries Inc. (ESI), highlights their expertise in laser drilling, as well as being the first roll-to-roll capable UV laser drill provider.
He also talks about their recently released RedStone PCB laser processing system, a low cost-of-entry solution for FPC manufacturers considering the adoption of laser processing for flex PCB.
RTW IPC APEX EXPO: Ventec Discusses CCL Supply Chain Issue
Mark Goodwin, COO of USA and Europe for Ventec International Group, and Jack Pattie, CEO of Ventec USA, discuss the effect of current material issues on the supply chain for copper-clad laminate, comment upon prospects for the future and stress the importance of customer-supplier relationships in forecasting and planning requirements.
Eagle Electronics: Success through 'Building Everything'
During a recent visit to Chicago, Editors Andy Shaughnessy and Patty Goldman stopped by Eagle Electronics just outside of Chicago. Chief Operating Officer Brett McCoy gave them a tour of the facility, and spoke about the company’s plans for the future, and why Eagle is bucking the niche market trend and manufacturing a wide variety of PCBs.
Rogers' John Ranieri Discusses 92ML Conductive Epoxy Materials for Power Electronics
John Ranieri, Business Development Manager for Rogers Corporation, sat down for an interview with me at IPC APEX EXPO in San Diego. He discussed Rogers’ 92ML™ series of thermally conductive epoxy materials, and some of the challenges facing technologists in the power electronics market.
RTW IPC APEX EXPO: Impact of Cross-Hatched Ground Planes on HF Electrical Performance of Flex Circuits
The HDPUG High-Frequency Flex project is studying the effect of different design features, specifically cross hatched ground planes, on signal integrity for flexible printed circuit boards operating at frequencies up to 20 GHz. Jonathan Weldon, RF Applications Engineer at DuPont Electronic Materials, discusses some of the results of the program.