Aismalibar to Attend PCIM 2024
June 5, 2024 | AismalibarEstimated reading time: 1 minute
Aismalibar will be attending PCIM 2024 in Nuremberg, Germany from June 11th to 13th, presenting new cooling technologies for power electronics, specifically Thermal Interface Materials (TIMs) and Insulated Metal Substrates (IMS). PCIM is the leading international exhibition and conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. The exhibition and conference are the international meeting point for the industry. Aismalibar will exhibit in booth 449 Hall 9 of the Nuremberg Exhibition Grounds.
Aismalibar Thermal Interface Materials have been designed to improve dielectric isolation and fast thermal transmission in power electronics and battery packs among others, taking into consideration cost reduction, lifetime performance, safety, and reliability.
Thermal Interface Materials are divided into two main areas, differentiated based on whether they need dielectric capacity. The dielectric requirement is determined by the electronic device, its operating voltage, and the applicable regulations regarding ground insulation. Additionally, Aismalibar has developed a series of applicable surfaces on the TIMs, differentiated by whether they need to be self-adhesive. Both surfaces serve, in turn, to reduce the air cavities that exist between the surfaces of the TIMs and the heatsinks or electronic components.
Aismalibar has a wide range of thermal management solutions, but this year it will focus on presenting the following new products:
- The BOND SHEET CURED GLASS FREE is used for Thermal Interface material in power electronics and battery isolation with 3,2w/mK and 4 to 6Kv dielectric strength.
- Thermal FR4 used in PCB manufacturing to improve thermal management and reduce thermal vias. The use of the Aismalibar thermal FR4 can reduce a 15% d the operating temperature of power components by improving the output or extending the life of the component.
- Insulated Metal Substrate COBRITHERM ULTRATHIN 5W and 8W used in high-end power AC/DC converters and high-power LED industry.
- And COBRITHERM ALP, made from an Aluminium base coated with a 100-micron dielectric ceramic layer with extra low thermal resistance and high dielectric strength up to 6KV. It is ideal for building battery housing, covers, partitions or radiators, power electronics and comfortable heat sinks, among other solutions. It is completely insulated and guarantees excellent contact between the battery and dissipation elements.
Suggested Items
Aismalibar to Showcase Thermal Management Solutions for EV Battery Systems at The Battery Show North America 2024
09/27/2024 | AismalibarAismalibar, a leader in innovative thermal management materials, will be presenting its newest solutions for electric vehicle (EV) battery systems at The Battery Show North America from October 7-11, 2024. Located at Huntington Place, Detroit, MI, Aismalibar will exhibit at booth 6231, unveiling a range of cutting-edge Thermal Interface Materials (TIMs) designed to improve the safety, performance, and longevity of EV batteries.
TSMC Expands Collaboration with Ansys by Integrating AI Technology to Accelerate 3D-IC Design
09/27/2024 | ANSYSAnsys and TSMC have expanded their collaboration to leverage AI for advancing 3D-IC design and develop next generation multiphysics solutions for a wider array of advanced semiconductor technologies.
Book Excerpt: The Printed Circuit Designer’s Guide to... Thermal Management with Insulated Metal Substrates, Vol. 2, Chapter 4
09/25/2024 | I-Connect007 Editorial TeamDirect-bonded copper (DBC) with a ceramic base is a commonly used assembly technology. While advantages include excellent solder crack compensation due to similar CTE values between component and substrate, the construction is fragile and therefore places limits on size and exposure to vibration. Small assemblies in basic shapes such as a rectangle can be done, although larger, more complex shapes become difficult.
Indium Experts to Present Advanced Research at International Symposium on Microelectronics
09/20/2024 | IndiumIndium Corporation experts will lead three presentations and a poster presentation at the 57th International Symposium on Microelectronics, organized by the International Microelectronics Assembly and Packaging Society (IMAPS), from October 1-3, in Boston, Massachusetts.
Successful Rehm Technology Days 2024 – Where the Future Meets Technology
09/17/2024 | Rehm Thermal SystemsTraditionally, the Rehm Technology Days offer a valuable opportunity for knowledge exchange, networking and discussion. Once again this year, numerous customers, partner companies, press representatives and employees from the worldwide locations met at the company headquarters in Blaubeuren-Seissen.