Intel, DARPA Develop Secure Structured ASIC Chips Made in the US
March 22, 2021 | IntelEstimated reading time: 2 minutes
Intel and the U.S. Defense Advanced Research Projects Agency (DARPA) today announced a three-year partnership to advance the development of domestically manufactured structured Application Specific Integrated Circuit (ASIC) platforms. The Structured Array Hardware for Automatically Realized Applications (SAHARA) partnership enables the design of custom chips that include state-of-the-art security countermeasure technologies. A reliable, secure, domestic source of leading-edge semiconductors remains critical to the U.S.
“We are combining our most advanced Intel® eASIC structured ASIC technology with state-of-the-art data interface chiplets and enhanced security protection, and it’s all being made within the U.S. from beginning to end. This will enable defense and commercial electronics systems developers to rapidly develop and deploy custom chips based on Intel’s advanced 10nm semiconductor process,” says José Roberto Alvarez, senior director, CTO Office, Intel Programmable Solutions Group.
As the sole U.S.-based advanced semiconductor manufacturer, Intel promotes supply-chain security by utilizing facilities within the U.S. to manufacture, assemble and test custom chips for the SAHARA partnership.
“Structured ASICs have advantages over FPGAs that are widely used in many Department of Defense applications. In partnering with Intel on the SAHARA program, DARPA aims to transform currently fielded as well as future capabilities into structured ASIC implementations with significantly higher performance and lower power consumption,” said Serge Leef, a program manager in DARPA’s Microsystems Technology Office. “SAHARA aims to dramatically shorten the ASIC design process through automation while adding unique security features to support manufacturing of the resulting silicon in zero-trust environments. Additionally, Intel will establish domestic manufacturing capabilities for the structured ASICs on their 10nm process.”
In collaboration with the University of Florida, Texas A&M and University of Maryland, Intel will develop security countermeasure technologies that enhance protection of data and intellectual property from reverse engineering and counterfeiting. University teams will use rigorous verification, validation and new attack strategies to test the security of these chips. The security countermeasure technologies will be integrated into Intel’s structured ASIC design flow.
Intel will use its structured ASIC technology to develop platforms that significantly accelerate development time and reduce engineering cost compared to traditional ASICs. Intel will manufacture these chips using its 10nm process technology with the advanced interface bus die-to-die interconnect and embedded multi-die interconnect bridge packaging technology to integrate multiple heterogenous die in a single package.
Intel® eASIC™ devices are structured ASICs, an intermediary technology between field-programmable gate arrays (FPGAs) and standard-cell ASICs. These devices provide lower unit-cost and run on lower power compared with FPGAs and provide a faster time to market and lower non-recurring engineering cost compared with standard-cell ASICs.
Suggested Items
Boeing Opens Research & Technology Center in Japan
04/23/2024 | BoeingBoeing today opened a Boeing Research & Technology (BR&T) Center in Japan that will focus on innovation to enable the commercial aviation industry meet its goal of net zero carbon emissions by 2050.
Schweizer Electronic Appoints Thomas Gottwald as New Member of the Executive Board
04/23/2024 | Schweizer Electronic AGThe Supervisory Board of Schweizer Electronic AG has appointed Mr. Thomas Gottwald to the Executive Board as CTO (Chief Technology Officer) for a period of 3 years with effect from 1 May 2024.
US Department of Defense Selects Intel Foundry for Phase Three of RAMP-C
04/23/2024 | IntelThe U.S. Department of Defense (DoD) has awarded Intel Foundry Phase Three of its Rapid Assured Microelectronics Prototypes - Commercial (RAMP-C) program.
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.