-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
AT&S to Build New Production Site for IC Substrates in Southeast Asia
June 1, 2021 | AT&SEstimated reading time: 2 minutes
AT&S AG, one of the leading manufacturers of high-end printed circuit boards and IC substrates, plans to build a new production site for IC substrates in Southeast Asia, subject to the approval of the Supervisory Board.
The planned investment will total up to € 1.7 billion for the construction of a new production complex for high-end substrates between 2021 and 2026. This would be the largest investment to date in the history of AT&S.
The project is based on, and subject to, a planned collaboration with two leading manufacturers of high-performance-computing semiconductors, with whom long-term contracts are to be concluded. These contracts are expected to be signed shortly.
About half of the investment volume is to be provided by the customers’ contributions to financing. The balance sheet presentation of these contributions is yet to be clarified. In any case, a capital increase by issuing new shares will not be required to finance the project.
The plan is to produce ABF substrates for high-performance processors at the location in Southeast Asia. These processors are applied in areas such as high-performance computers, data centres, gaming, 5G, automotive and AI. The planned production site will total approximately 200,000 m² in size. Construction is scheduled to start in the second half of 2021, and high volume production at the end of 2024. The currently planned capacity can generate additional revenue potential of up to € 1 billion p.a. when fully utilised. The Management Board emphasises the importance of this project. It contributes significantly to the future diversification of the customer portfolio, broadening the regional footprint and the company’s positioning in the rapidly growing market for ABF substrates.
In case of this investment and given the development in the other business segments as part of the “More than AT&S” strategy, the Management Board expects a business development with revenue of approximately € 3 billion in the financial year 2025/26 (2023/24: more than € 2 billion). This would correspond to a compound annual growth rate (CAGR) of approximately 20% through to 2025/26. Due to the increased focus on high-end applications in all business segments, an EBITDA margin in the range of 27 to 32% can be achieved (2023/24: 25 to 30%). Depending on the balance sheet presentation, the net debt-to-EBITDA ratio could temporarily exceed the medium-term target of <3 and the equity ratio could fall short of the internal target of >30% during the project phase until the capacities are utilised. The Group’s medium-term ROCE target would continue to be >12%; this target should be achieved with the ramp-up of production.
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
ICAPE Webinar: Want to Know How to Order PCBs in 5 Minutes?
03/28/2024 | ICAPE GroupIn today's fast-paced world, efficiency is key. Nowhere is this more evident than in the realm of PCB procurement. But what if we told you that ordering PCBs could be as easy as a few clicks and take just 5 minutes?
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Punching Out: Acquiring a PCB/EMS Shop: Brownfield vs. Greenfield
03/27/2024 | Tom Kastner -- Column: Punching Out!We often get asked about establishing a new company (greenfield) rather than buying an existing PCB or EMS shop (brownfield). There are many criteria to consider. Many buyers want to grow through M&A, but they cannot find acquisition targets that fit their criteria. Perhaps they can find the right shop, or at least one that fits five out of 10 criteria, but they encounter obstacles, such as owners who do not want to sell, price expectations that are too high, or negotiations that are too difficult. Despite the interest in building new facilities, since 2000, few companies have gone the greenfield route. Here is a look at the pros and cons of buying vs. building.
Ventec to Launch New Bondply Dielectrics and Value-Added Services at IPC APEX EXPO 2024
03/26/2024 | Ventec International GroupVentec International Group is to reveal new products for advanced signal integrity and thermal performance, and introduce services, during IPC APEX EXPO 2024, April 9-11 on booth # 4309.