Samsung Foundry Innovations Power the Future of Big Data, AI/ML and Smart, Connected Devices
October 7, 2021 | Business WireEstimated reading time: 2 minutes
Samsung Electronics, a world leader in advanced semiconductor technology, today unveiled plans for continuous process technology migration to 3- and 2-nanometer (nm) based on the company’s Gate-All-Around (GAA) transistor structure at its 5th annual Samsung Foundry Forum (SFF) 2021.
With a theme of Adding One More Dimension, the multi-day virtual event is expected to draw over 2,000 global customers and partners. At this year’s event, Samsung will share its vision to bolster its leadership in the rapidly evolving foundry market by taking each respective part of foundry business to the next level: process technology, manufacturing operations, and foundry services.
“We will increase our overall production capacity and lead the most advanced technologies while taking silicon scaling a step further and continuing technological innovation by application,” said Dr. Siyoung Choi, President and Head of Foundry Business at Samsung Electronics. "Amid further digitalization prompted by the COVID-19 pandemic, our customers and partners will discover the limitless potential of silicon implementation for delivering the right technology at the right time."
GAA is ready for customers' adoption - 3nm MP in 2022, 2nm in 2025
With its enhanced power, performance and flexible design capability, Samsung’s unique GAA technology, Multi-Bridge-Channel FET (MBCFETTM), is essential for continuing process migration. Samsung's first 3nm GAA process node utilizing MBCFET will allow up to 35 percent decrease in area, 30 percent higher performance or 50 percent lower power consumption compared to the 5nm process. In addition to power, performance, and area (PPA) improvements, as its process maturity has increased, 3nm’s logic yield is approaching a similar level to the 4nm process, which is currently in mass production.
Samsung is scheduled to start producing its customers' first 3nm-based chip designs in the first half of 2022, while its second generation of 3nm is expected in 2023. Newly added to Samsung’s technology roadmap, the 2nm process node with MBCFET is in the early stages of development with mass production in 2025.
FinFET for CIS, DDI, MCU - 17nm specialty process technology debuts
Samsung Foundry is continuously improving its FinFET process technology to support specialty products with cost-effective and application-specific competitiveness. A good example of this is the company’s 17nm FinFET process node. In addition to the intrinsic benefits afforded by FinFET, the process node has excellent performance and power efficiency leveraging a 3D transistor architecture. Consequently, Samsung’s 17nm FinFET provides up to 43 percent decrease in area, 39 percent higher performance, or a 49 percent increase in power efficiency compared to the 28nm process.
Additionally, Samsung is advancing its 14nm process in order to support 3.3V high voltage or flash-type embedded MRAM (eMRAM) which enables increased write speed and density. It will be a great option for applications such as micro controller units (MCUs), IoT and wearables. Samsung’s 8nm radio frequency (RF) platform is expected to expand the company’s leadership in the 5G semiconductor market from sub-6GHz to mmWave applications.
Looking ahead, in cooperation with its ecosystem partners, Samsung Foundry’s SAFE Forum will be held virtually in November 2021.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
Boeing's Janene Stinson Earns IPC Excellence in Education Award at IPC APEX EXPO 2024
04/22/2024 | IPCThe IPC Excellence in Education award was presented to Janene Stinson, Boeing, at IPC APEX EXPO 2024 in Anaheim, California, in recognition of her significant contributions to workforce development and leadership.