Material Management and Control
November 21, 2022 | Davina McDonnell, CogiscanEstimated reading time: 2 minutes
In a market that is trying to catch up with increasing customer demands and quickly ship products out the back door, no electronics manufacturing plant can afford to lose any time or resources during the production process. Manufacturers are forced to do more with less and get the most out of every single precious component.
When you finally get your hands on inventory, perhaps after months of delays due to part allocation or supply-chain snafus, it’s critical that not a single part is wasted. While reducing waste has always been a big focus for electronics manufacturers, it’s now a top concern for factories around the globe to ensure the right material is in the right place at the right time.
Getting Control of the Kitting Process
One area fraught with the possibility for material mismanagement is the kitting process. Considering most PCBAs today use hundreds of different components, kitting the materials for a production run can be both arduous and time consuming. In a fast-paced environment like electronics manufacturing, if the kitting process isn’t controlled and managed properly, it can expose a manufacturer to opportunities for waste.
With Cogiscan’s kitting control module, operators are precisely guided through the material picking process with a detailed kit list for each job—listing exactly where the components are located, how many are needed for the scheduled job, and precisely where they need to be loaded. Whether the components are sitting on stockroom shelves, or within an intelligent storage tower, the kit list will define the precise location.
As every factory runs a bit differently, this kitting module allows for custom-defined rules based on inventory consumption preferences. For example, a manufacturer can set up the system to pull materials based on FIFO rules, to consume partial reels first, or to select and kit reels that have enough components to get through that entire job to maximize line productivity and reduce material replenishment time. Each manufacturer has the freedom to customize the kitting preferences based on the real-time production environment.
Setup Control for the SMT Factory
Accurate kitting is only half the equation to ensure the right materials are selected and ready for production. The other important factor is the actual setup of materials and machines. With Cogiscan’s setup control module, manufacturers can verify that all the right elements are being used correctly. This includes validation of components, tooling, and consumables, as well as the machine program.
Instead of waiting until the job is running on the SMT line, manufacturers can verify accurate setup in the offline setting. So, if there is an error found in the setup configuration by the system, it can be corrected before being released to the line.
To read this entire article, which appeared in the November issue of SMT007 Magazine, click here.
Suggested Items
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.
Groundbreaking Ceremony Marks the Beginning of a New Era for Newccess Industrial; The Construction of the MINGXIN Building
04/12/2024 | Newccess IndustrialOn a clear and sunny day in March, the groundbreaking ceremony for the MINGXIN Building took place in Shenzhen, China. This moment marked the official commencement of construction for a project that will reshape the semiconductor materials industry.
The Need for a Holistic Global Sustainability Standard
04/10/2024 | Michael Ford, Aegis SoftwareNo one can deny that the resources of our fragile planet are finite. The environment seems like a third party, subject to constant degradation. We’re acutely aware of the effects of pollution on our climate, and despite our “throw-away” culture, recycling and recovery of materials has remained relatively expensive, even as we use more energy just to survive.
iNEMI Publishes Four Roadmap Topics
04/04/2024 | iNEMIThe International Electronics Manufacturing Initiative (iNEMI) announces the availability of the first roadmap topics in the new iNEMI Roadmap format. Printed circuit boards, sustainable electronics, smart manufacturing, and mmWave materials and test are now available online.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.