Rainfall Spacecraft Re-enters Over Tropics
June 16, 2015 | NASAEstimated reading time: 1 minute
The Tropical Rainfall Measuring Mission (TRMM) spacecraft re-entered the Earth’s atmosphere on June 16, 2015, at 2:54 a.m. EDT, over the South Indian Ocean, according to the U.S. Strategic Command’s Joint Functional Component Command for Space through the Joint Space Operations Center (JSpOC). The U.S. Space Surveillance Network, operated by the Defense Department's JSpOC, had been closely monitoring TRMM’s descent since the mission was ended in April. Most of the spacecraft was expected to burn up in the atmosphere during its uncontrolled re-entry.
Since the beginning of the space age in the 1950s, there has been no confirmed report of an injury resulting from re-entering space objects. The last NASA spacecraft to re-enter was the Upper Atmosphere Research Satellite (UARS) in September 2011. UARS was a much larger satellite than TRMM and NASA received no reports of surviving debris.
NASA’s Orbital Debris Program Office estimates 12 components of the TRMM spacecraft could survive reentry. The chance that one of these pieces would strike someone is approximately 1 in 4,200, which is a relatively low chance.
Any sightings of suspected TRMM debris should be reported to local authorities. The pieces of TRMM expected to survive re-entry are made of titanium and are not toxic. Debris could have sharp edges and should not be touched or handled, in the unlikely event someone were to find TRMM fragments.
The value of the new type of precipitation data produced by TRMM is widely recognized by both the scientific community and the operational weather forecast community. TRMM data were used to improve weather models and hurricane track and intensity estimates around the world.
The TRMM dataset will continue to be used for research to improve global weather and climate models. The data meet exacting standards for data preservation, so that future scientists will be able to use the data. The dataset also is being processed to make up one continuous climate data record with the follow-on Global Precipitation Mission (GPM), also a joint project between the U.S. and Japan.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
Altair Acquires Cambridge Semantics, Powering Next-Generation Enterprise Data Fabrics and Generative AI
04/22/2024 | AltairAltair a global leader in computational intelligence, acquired Cambridge Semantics, a modern data fabric provider and creator of one of the industry’s leading analytical graph databases.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.