-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
A Rework Dilemma: PCB Shields
July 15, 2015 | Bob Wettermann, BEST Inc.Estimated reading time: 1 minute
RF shields minimize radio frequency (RF) noise to prevent it from affecting the sensitive and critical electronic components beneath the shield. They also prevent such noise from interfering with neighboring devices or other systems in the vicinity. RF shields typically have a unique design and conform to the layout of the PCB. Often, the shields are not regular-shaped designs; rather, they are designed and are shaped by the PCB layout. Typically, these shields can be found on handheld wireless device PCBs such as smartphones, netbooks, tablets, portable medical devices and audio/video players, to name a few.
There are two basic construction types for these shields. Some of them are a two-piece construction with a "fence" soldered to the PCB and a cover fitted over this fence.
Other shields are a one-piece construction with an open-sided can overlaying the components and soldered to the PCB. These one-piece shields are a serious challenge to rework and will be the focus of this rework discussion.
Challenges of shield rework
There are numerous challenges associated with reworking shields, including, but not limited to:
1. Devices are very tight and close to the shield itself—many times within a few millimeters. This means that the rework process, if not precisely controlled, can present problems in disturbing nearby devices.
2. Shield trace solder excavation and PCB board prep are challenging as well, especially for odd-shaped shields. Manual methods require extreme dexterity as the distance between the land of the shield and neighboring devices is very small. This means that neighboring devices can be disturbed.
Resoldering of the shields can be very challenging as the gap between the shield lip and the board needs to be closed so as to not allow for any ingress or egress (in some cases) of RF signals. This means there is little room for error.
Editor's Note: This article originally appeared in the July 2015 issue of SMT Magazine.
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.