-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
ROSE – What Does the Data Mean and When Is It Useful?
July 29, 2015 | Tony Musall, Foresite Inc.Estimated reading time: 1 minute
ROSE (Resistivity Of Solvents Extracted) testing was developed in the 1960s as a quality assurance and process monitoring method and is still regularly used today. Unfortunately, profound changes in the processes and materials used in the electronic assembly industry have a significant impact on the usefulness of the test. This article will discuss what ROSE test results really mean and when they are—and more importantly, are not—useful.
What does the data mean?
ROSE testing is performed by submerging an entire electronic assembly into a solution of DI water and IPA (isopropyl alcohol). Results are given as µg/cm2 of NaCl equivalence and represents the amount of solulizable ionic contamination present on the entire assembly. The reading is derived by simply measuring the resisitivity of the solution over time; the test does not identify specific ions present.
Limitations in this test method have been realized as many current flux residues are not particularyly soluble in the test solution (the test was developed for wave-soldered through hole hardware soldered with RMA fluxes). Additionally, low component clearances make it difficult to remove and detect trapped ionic contamination.
When is it useful?
Depending on the complexity of the assembly and the materials used, the ROSE test method can still be a reasonably effective process monitoring tool. With an established baseline in place, ROSE testing can provide useful feedback if a process errata results in a change in cleanliness.
Is ROSE testing a good predictor of reliability?
Unfortunately, ROSE testing is not (and in our opinion, never really was) a good predictor of product reliability. With shrinking components and increased density, decreasing pitches, and ever expanding presence of high-sensitivity circuits, cleanliness is more important now than it has ever been. Foresite routinely links field failures to small pockets of localized contamination (e.g. no-clean flux is not fully heat-activated after wicking under a selective solder pallet) which simply can not be detected by fully submerging the assembly and averaging the results over the entire surface area of the board.
ROSE testing can still be useful in a limited manner as a process monitoring tool, but relying on a test developed over fifty years ago for determining cleanliness of wave-soldered through hole boards processed with RMA flux to predict reliability of current electronic assemblies is asking for trouble.
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.