EIPC Winter Conference, Day 2
April 3, 2019 | Alun Morgan, EIPCEstimated reading time: 8 minutes
After the papers from the first day of the EIPC Winter Conference in Milan on February 14–15, the delegates were hosted at a reception and plant tour of Elga Europe at their nearby production facility. CEO Georgio Favini CEO described that Elga was founded in 1973 and had had three important joint ventures in its history—first with Lea Ronal, then Tokyo Ohka, and Eternal currently. Favini explained that Elga Europe is the European leader in dry-film photoresist for PCB fabrication and the only remaining European producer with a capacity of 15 million m2/year.
Favini described the dry-film production process in detail. Then, the delegates were treated to a comprehensive plant tour, including all the stages of manufacturing through mixing, coating, drying, in-line inspection, testing, and slitting. The delegates greatly appreciated the hospitality shown by Elga Europe and felt privileged to have been shown around the impressive facility by such knowledgeable staff.
The delegates then went back to downtown Milan for a gastronomic dinner in the very chic deli/restaurant called “Eataly.” Suitably refreshed after the excellent networking dinner, the delegates took their places for day two of the programme.
Sessions and Papers
The opening session titled “New Developments in PCB Technology: DFM and Cost-effective Supply Chain Management” was chaired by EIPC Board Member Michele Stampanoni who introduced the first speaker, Robrecht Belis of Elsyca. Belis introduced a PCB plating performance simulation system that allows plating layer thickness distribution prognosis before the start of production.
Belis explained that the PCB plating process is very sensitive to panel size, pattern, holes, plating infrastructure, and the electrolyte. The system characterises the plating process using infrastructure and electrolyte data and utilises the specific circuit design to build a simulation of plating distribution.
Belis went on to describe how design modifications, copper balancing, and layout optimisation can then be performed before production starts. Belis concluded with a case study carried out at EuroCircuits where he demonstrated the resulting optimised layout, time savings, and better-quality deposition uniformity over manual techniques.
Roland Valentini of Gardien Group was next to present on “The Impact on Supply Chain Management: Final PCB Yield and Profitability.” Valentini started his presentation from the premise that there had been a major change in the industry from analogue to digital, and that this had brought new challenges for manufacturing and test. He further argued that traceability is going to be one of the key requirements to fulfil in high-reliance markets, identifying the sectors as automotive, space, aerospace and military, medical, industrial, network and 5G base stations, mobile communications, and home automation.
Valentini also described the Gardien-managed supply chain process whereby the supply chain between the purchasing manager and PCB fabricator is kept as lean as possible with steps non-value-added steps being eliminated. The presentation concluded with a Chinese PCB sourcing example with the potential to effectively double the number of potential PCB suppliers, and a description of the Gardien test service to the PCB industry to improve quality, reliability, and total productivity.
Page 1 of 2
Suggested Items
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.