-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Researchers Improve Method to Recycle and Renew Used Cathodes from Lithium-Ion Batteries
April 19, 2019 | Jacobs School of EngineeringEstimated reading time: 2 minutes
Researchers at the University of California San Diego have improved their recycling process that regenerates degraded cathodes from spent lithium-ion batteries. The new process is safer and uses less energy than their previous method in restoring cathodes to their original capacity and cycle performance.
Zheng Chen, a professor of nanoengineering who is affiliated with the Sustainable Power and Energy Center at UC San Diego, led the project. The work was published in Advanced Energy Materials.
“Due to the rapid growth of electric vehicle markets, the worldwide manufacturing capacity of lithium-ion batteries is expected to reach hundreds of gigawatt hours per year in the next five years,” Chen said. “This work presents a solution to reclaim the values of end-of-life lithium-ion batteries after 5 to 10 years of operation.”
Chen’s team previously developed a direct recycling approach to recycle and regenerate degraded cathodes. It replenishes lithium ions that cathodes lose over extended use and restores their atomic structures back to their original states. However, that process involves pressurizing a hot lithium salt solution of cathode particles to around 10 atmospheres. The problem is this pressurizing step raises costs and requires extra safety precautions and special equipment, said Chen.
So the team developed a milder process to do the same job at ambient pressure (1 atmosphere). The key was using eutectic lithium salts—a mixture of two or more salts that melts at temperatures much lower than either of its components. This combination of solid lithium salts produces a solvent-free liquid that researchers can use to dissolve degraded cathode materials and restore lithium ions without adding any extra pressure in the reactors.
The new recycling method involves collecting cathode particles from spent lithium ion batteries and then mixing them with a eutectic lithium salt solution. The mixture is then heat treated in two steps: it is first heated to 300 C, then it goes through a short annealing process in which it is heated to 850 C for several hours and then cooled naturally.
Researchers used the method to regenerate NMC (LiNi0.5Mn0.3Co0.2), a popular cathode containing nickel, manganese and cobalt, which is used in many of today’s electric vehicles.
“We made new cathodes from the regenerated particles and then tested them in batteries built in the lab. The regenerated cathodes showed the same capacity and cycle performance as the originals,” said Yang Shi, the first author who performed this work as a postdoctoral researcher in Chen’s lab at UC San Diego.
“In an end-of-life lithium-ion battery, the cathode material loses some of its lithium. The cathode’s crystal structure also changes such that it’s less capable of moving ions in and out. The recycling process that we developed restores both the cathode’s lithium concentration and crystal structure back to their original states,” Shi said.
The team is tuning this process so that it can be used to recycle any type of cathode materials used in lithium-ion and sodium-ion batteries.
“The goal is to make this a universal recycling process for all cathode materials,” Chen said. The team is also working on a process to recycle degraded anodes, such as graphite as well as other materials.
Chen is also collaborating with UC San Diego nanoengineering professor Shirley Meng, who is the director of the Sustainable Power and Energy Center, to identify subtle changes in the cathode microstructure and local composition using high-resolution microscopic imaging tools.
Suggested Items
Robotas Drives Industry 4.0 with IPC CFX Integration for Mascot Product Line
05/22/2024 | Robotas Technologies Ltd.Robotas Technologies Ltd., pioneers and specialists in the world of THT component placement and clinching systems, has recently announced the adoption of the IPC Connected Factory Exchange (CFX) standard for their Mascot product family.
The Knowledge Base: The Transformative Role of AI and ML
05/22/2024 | Mike Konrad -- Column: The Knowledge BaseArtificial intelligence (AI) and machine learning (ML) are at the vanguard of a technological revolution, redefining the parameters of manufacturing and business processes. Perhaps their most notable impact is within the electronics assembly industry, where they drive unprecedented levels of automation, enhancing efficiency and contributing to significant financial outcomes. This exploration delves into the transformative role of AI and ML, shedding light on the mechanisms of automation enhancement and the resultant financial implications.
TPCA Releases Guide to Help PCB Industry Achieve Low-Carbon Transformation
05/21/2024 | TPCAThe introduction of EU carbon tariffs, international brands committing to carbon neutrality, and the upcoming carbon fee in Taiwan means that carbon reduction is no longer just a slogan. Domestic and international pressures have turned carbon reduction into the golden grail of corporate sustainability.
Murata Obtains ISO 26262 Certification for Functional Safety in Automotive Applications
05/21/2024 | MurataMurata Manufacturing Co., Ltd., obtained the ISO 26262 development process certification for Functional Safety* Automotive ISO 26262 from the German third-party certifier SGS-TÜV Saar GmbH on February 13, 2024.
HBM3e Production Surge Expected to Make Up 35% of Advanced Process Wafer Input by End of 2024
05/20/2024 | TrendForceTrendForce reports that the three largest DRAM suppliers are increasing wafer input for advanced processes. Following a rise in memory contract prices, companies have boosted their capital investments, with capacity expansion focusing on the second half of this year.