Mr. Laminate Tells All: Where in the Holy Halogens did 900, 900, 1500 Come From?
November 12, 2015 | Doug Sober, Essex Technologies GroupEstimated reading time: 4 minutes
I took the requirements from IEC-61249-2-21 and imported them into the IPC standards development process, creating document IPC-4101/92. The test method for the determination of halogen content in base materials, IEC 61189-2C12, was imported into the IPC manual simply by rewriting it in IPC format. IPC-TM-650 Method 2.4.41 was the test method number used by the IPC to determine the halogen content of FR-4 CCL. Underwriters’ Laboratories (UL) uses this test today to define which products are ANSI grade FR-4.0 and which are ANSI grade FR-4.1.
From that time, other IEC and IPC documents have been developed for epoxy, polyimide and cyanate ester halogen-free CCL grades and prepregs. The requirement has also always remained as 900, 900, and 1500, as previously discussed. Only one test method has been referenced.
Neither TC91/WG4 nor IPC planned to use this requirement for any other products other than CCL in the electronics supply chain. The specification was developed for and was only applicable to FR-4 CCL and prepreg. However, some years later, several OEM computer manufacturers and others decided that the 900, 900, 1500 requirements could be applied to everything else in the electronics supply chain, including soldermask, legend ink, adhesives, cases and power cords. PVC, used in many electronics applications, was now also to be eliminated as it contained chlorine.
This expansion to other materials was supposed to be documented in a new standard, IPC/JEDEC Joint Standard 709, but there was controversy as to why a CCL specification had relevance to soldermask or adhesive or anything else for that matter. There was also a belief that chlorine and bromine should only be reported if it came from organic chlorine and bromine found in flame retardants. Additionally, there was also discontent as to why fluorine was not considered a halogen for definition purposes. I still wonder that, too. However, after several years of meetings, comments and balloting, this document was never published by IPC, but JEDEC did decide to publish by itself and under their own logo.
I have seen many announcements in trade journals indicating that some new material in the electronics supply chain has been developed and is halogen-free based on the 900, 900, 1500 requirements. Of course these requirements are not related to any historical testing on the materials referenced. The requirements are not being pulled from thin air but more like rarified air.
I apologize on behalf of myself and Dr. Shibata for creating this requirement that has been exported into so many areas unrelated to CCL.
Doug Sober is the president of Essex Technologies Group and may be reached by clicking here.
Page 2 of 2Suggested Items
All-Inclusive: PRIDE Industries Helps Employees With Disabilities to Succeed
05/01/2024 | Sandy Gentry, IPCPRIDE Industries is the leading employer of people with disabilities and those with other barriers to employment in the United States, including veterans and former foster youth. The company offers job training, placement, on-the-job coaching, and skills development for independent living. It has held IPC membership since 2000. Read more about this unique business and its connection to the electronics manufacturing industry.
TTM’s High Tech Expansion and Industry Innovation
04/30/2024 | Marcy LaRont, PCB007 MagazineTom Edman has been the CEO of TTM Technologies since 2014 and has an extensive background in electronics and manufacturing. TTM is a leading global manufacturer of technology solutions, including mission systems, RF component and RF microwave microelectronics assemblies, and quick turn and advanced technology printed circuit boards.
Latest Test and Inspection Solutions from GOEPEL electronic at SMTconnect 2024
04/29/2024 | GOEPEL electronicGOEPEL electronic will be demonstrating automated test and inspection equipment at SMTconnect, taking place in Nuremberg from June 11 to 13, 2024.
Arlon Electronic Materials Awarded Requalification to IPC-4101 QPL for All Polyimide Specification Sheets
04/29/2024 | IPCIPC's Validation Services Program has awarded Arlon Electronic Materials Division, an electronics material manufacturing company headquartered in Rancho Cucamonga, Calif., an IPC-4101 Qualified Products Listing (QPL) requalification for the third time.
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.