Weiner’s World: March 2016
April 4, 2016 | Gene Weiner, Weiner International Inc.Estimated reading time: 6 minutes
Editor’s note: This blog was originally published in March 2016 at www.weiner-intl.com and is being reprinted here with special permission from the author.
Sellers of equipment at the Shanghai CPCA event complained of continued poor business. This was especially evident amongst those selling to firms building boards for phones and other portables devices as indicated below. However, not all reports were bad. Major fabricators such as Wu's in China, not dependent upon HDI or flexible products, stated that they were "satisfied" with their current business levels.
Taiwan-based Chin-Poon Industrial, a major supplier of automotive circuits, saw its net profits increase 11.8% over 2014 to a record high $61.13 million in 2015. It also improved its gross margin improved to 14.7% from 13.6% last year.
Are there too many "apples"?
Flexible PCB maker Flexium Interconnect revenues dropped 46.2% on month and 7.71% on year to a 19-month low of $26.91 million in February. Its revenues for the first two months of 2016 were down 6.46% from last year. Flexium expects its capacity utilization rate to stay flat at 50–55% in the first quarter of 2016. Career Technology's revenues fell 3.5% from a year earlier in February 2016, which marked the seventh consecutive month of on-year revenue decreases. Career Tech‘s February revenues $23.5 million, its lowest since February 2014. The company's cumulative 2016 through the month were down 16.7%. FPCB maker Zhen Ding Technology Holding also reported revenue decreases for the month. Down 41.1% on month and down 5.8% year-on-year to a 24-month low.
IPC APEX EXPO in Las Vegas had one of the best first days in years in spite of the relatively poor physical layout and the positioning of the meeting rooms. Many unrecognizable (new) faces were seen wandering the expanded exhibit spaces checking out the latest in robotics as well as the usual product improvements, and attending conferences and committee meetings. 3D printing appeared to be finally garnering more attention at the IPC. Perhaps that will spur additional funding for R&D amongst IPC members to develop the materials and equipment needed to make it commercially viable.
The multi-show combination in Shanghai showed weakness in the poorly attended CPCA exhibits, strength in the strongly attended SEMICON China show and conference, interest in the relatively small FPD (flat panel display) exhibits, not much new in productronica China, and special interest in electronica China's automotive/sensor component presentations. A number of those who attended and exhibited at CPCA said that they should have attended the IPC APEX EXPO event instead, and would have done so had it not been for the other concurrent events at Shanghai. Several others chose to exhibit at SEMICON rather than the CPCA, as they had done in the past, and said they would remain at that show as SEMICON seems to have begun to shift more focus towards packaging and its supply chain.
A good working model for the future?
I had an opportunity to have a chat with SEMI president and CEO Denny McGuirk during this month's trade show trip to Shanghai. He provided some interesting insight as to SEMI's current position and future, his views on trade associations, and SEMI's direction. He views SEMI as the place where the entire electronic supply chain can meet and interact. He pointed out that SEMI is now called just that: SEMI—not the Semiconductor Equipment & Materials Institute. He stated that the next target industry to bring into SEMI's family would be MEMS. He stated that SEMI is truly a global organization and that all regional unit presidents report directly to him. Denny also pointed out that it is important to note that SEMI's board is composed entirely of CEOs and Chairmen of enterprises currently active in the industry. This allows them to commit, on the spot, their corporations to decisions made during board meetings.
Page 1 of 2
Suggested Items
Robotas Drives Industry 4.0 with IPC CFX Integration for Mascot Product Line
05/22/2024 | Robotas Technologies Ltd.Robotas Technologies Ltd., pioneers and specialists in the world of THT component placement and clinching systems, has recently announced the adoption of the IPC Connected Factory Exchange (CFX) standard for their Mascot product family.
Advocacy: There’s No Time to Waste
05/21/2024 | Marcy LaRont, PCB007 MagazineIn the late 1990s, I worked for a PCB company ardently working to build manufacturing presences in Malaysia, Taiwan, and eventually China’s mainland. For some of us who had the resources, we followed our OEM customers offshore as they began demanding increasingly greater price concessions from their stateside suppliers. The government was not coming to the rescue of the PCB manufacturer, so we rode the changing economic tide as it turned unwaveringly toward globalism and cheaper labor.
Real Time with… IPC APEX EXPO 2024: Unveiling the New Chief Strategist of Advanced Packaging at IPC
05/21/2024 | Real Time with...IPC APEX EXPODevan Iyer, IPC's new chief strategist of advanced packaging, shares his industry experience and the objectives of his role and emphasizes the necessity for solid standards and guidelines for new packaging technologies and design methodologies. He also highlights the significance of diverse package technologies across different markets. Devan is looking forward to collaborating with IPC and industry members as they find ways to connect emerging package technologies with PCB/EMS systems.
Zentech First to Adopt IPC Apprenticeship National Program Standards
05/20/2024 | Cory Blaylock, IPCIPC achieved a landmark in 2023 by creating an apprenticeship program approved by the U.S. Department of Labor. With such a registered framework in place, industry can work through IPC to secure local, state, and federal dollars for workforce development in a way they’ve never been able to do before. Zentech Manufacturing, headquartered in Baltimore, Maryland, with production facilities in Bloomington, Illinois, and Richardson, Texas, is the first employer partner to adopt IPC’s national program. Click here to read their story.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/17/2024 | Andy Shaughnessy, Design007 MagazineThis week, trade shows are at the top of our feed, with our coverage of the Del Mar Electronics and Manufacturing Show and IPC APEX EXPO. These two longtime events are almost polar opposites in size and scope, but Del Mar seems to be expanding from its roots as a “neighborhood gathering” with its move into the Del Mar Fairgrounds. The Del Mar show always has a good “buzz factor,” which is something you can’t buy.