-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
The Fundamentals of Improving PCB Thermal Design
October 3, 2016 | Gabriel Ciobanu, Continental Corp., and Boris Marovic, Mentor GraphicsEstimated reading time: 1 minute
Continental's automobile engineers have many years of experience building critical parts and systems for automobiles, from the chassis and safety systems to the powertrain, interior control systems, and tires. Much has changed in the past decade, and electronic technology has become an important aspect of what the company supplies to OEM and other manufacturers worldwide. Electronics are doing more now than ever to provide safer cars, cleaner power, more mobility, and smarter driving.
Making sure that automotive electronics are reliable, safe, and properly designed begins at the component level. Heat must be addressed early in the design process for these goals to be achieved. The most important thermal resistance for heat, outside the IC package, is the PCB. Continental engineers use 3D computational fluid dynamics (CFD) to simulate and test a PCB’s thermal design. Modeling the main heat flow paths in detail is critical to ensure that generated heat in the component flows out to the ambient, either through convection, conduction, or radiation. Knowing the thermal junction resistance allows optimizing a design for more efficient and less costly heatsinks, materials, and ICs.
When building a model to use in simulation, different methods can be used to represent chip packages and PCBs. Chip packages are typically defined as four types. The simple cuboid is a lumped component with some material properties and a heat source applied to it. The 2-resistor model doesn’t include any thermal capacitance and is therefore not suitable for transient analysis of component temperatures. The Delphi model is comprised of several thermal resistances and capacitances and thus is more accurate and suitable for transient simulations. Finally, the detailed model is modeled explicitly and is the most accurate model; however, it also increases the simulation time and requirements for computing resources.
For the PCB, four detailing levels from simple to complex also are used in simulation: lumped approximation, individual layers’ representation, layers modeled with “patches,” and copper tracks and areas modeled in detail.
To read this entire article, which appeared in the September 2016 issue of The PCB Design Magazine, click here.
Suggested Items
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?