Lincoln Lab Transfers Integrated Circuit Process to Industry
June 26, 2020 | MIT News OfficeEstimated reading time: 3 minutes
Fabrication technique will enable SkyWater Technology to manufacture a range of electronics that can withstand harsh radiation environments.
High levels of radiation, such as those occurring naturally in space and at high altitudes on Earth, can wreak havoc on electronics. MIT's Lincoln Laboratory has developed a unique process for making integrated circuits resistant to damage and malfunction caused by extreme radiation levels.
This fabrication capability — the 90-nanometer fully depleted silicon-on-insulator (FDSOI) complementary metal-oxide-semiconductor (CMOS) process — is now being transferred to microchip manufacturer SkyWater Technology, which will use it to produce radiation-hardened, or rad-hard, electronics.
“Our 90-nanometer FDSOI CMOS process has matured and scaled, and it has reached a level of interest for those who need integrated circuits that are exposed to extreme radiation environments,” says Pascale Gouker, a senior staff member at Lincoln Laboratory who has worked on this technology for more than two decades. “There are many applications in space, high-energy physics, and other national security-related areas that operate in extreme environments and need to be 'rad-hard.'”
Lincoln Laboratory began working on fully depleted silicon-on-insulator technology in the mid-1990s under sponsorship of the U.S. Defense Advanced Research Projects Agency (DARPA). As the size of transistors shrank and the number that could be packed onto a silicon chip grew, fully depleted technology could help manufacturers enhance their chips' energy efficiency and performance. In the ensuing years, variants of the laboratory's baseline FDSOI technology were optimized for operation under specialized conditions, such as radio frequency range, extreme low power, and for cryogenic, high-temperature, and extreme radiation environments. The extreme-radiation capability is the basis of the current technology transfer to SkyWater Technology. It was developed with initial sponsorship from the Defense Threat Reduction Agency and more recently with support from the Office of the Secretary of Defense through the Trusted and Assured Microelectronics (T&AM) program, with additional funding provided by the U.S. Department of Energy.
“We are excited to accelerate our support of Department of Defense objectives with the transfer of this proven FDSOI process from Lincoln Laboratory,” says Brad Ferguson, SkyWater chief technology officer. “This process technology will enable an unprecedented spectrum of strategic rad-hard solutions for system designers while also extending a range of hardened capabilities for numerous industrial uses.”
This technology transfer is associated with an investment for a strategic manufacturing capability in radiation-hardened microelectronics that the Department of Defense (DoD) T&AM program is making at SkyWater, which is a trusted, DoD-accredited pure play foundry. The T&AM program is developing enhanced sources of microelectronics for the DoD's unique needs. The T&AM program seeks to collaborate with industry and key laboratory partners to provide sustainable, assured technology solutions for national security and defense. The SkyWater investment, announced in October 2019, includes up to $170 million to enhance microelectronics capabilities for the DoD and the rad-hard market.
This rad-hard fabrication capability will complement SkyWater's existing 90-nanometer rad-tolerant production capability. In addition to supporting DoD needs, this transfer will also help SkyWater address non-defense-related opportunities for rad-hard electronics, such as commercial space operations and medical imaging applications.
Craig Keast, the associate head of Lincoln Laboratory's Advanced Technology Division, says that the 90-nanometer FDSOI CMOS technology will be “the most advanced radiation-hardened-by-process technology available to the radiation circuit design community in the country” once it is transferred. Lincoln Laboratory's transfer of its technology to industry is a key part of its mission as a federally funded research and development center.
“A large team has worked for many years to bring this technology to fruition, and it is wonderful to see it picked up by commercial industry so that it can have broader impact on both government and commercial applications,” Keast adds.
Read the original article here.
Kylie Foy | Lincoln Laboratory
Suggested Items
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
Nanotechnology Market to Surpass $53.51 Billion by 2031
04/25/2024 | PRNewswireSkyQuest projects that the nanotechnology market will attain a value of USD 53.51 billion by 2031, with a CAGR of 36.4% over the forecast period (2024-2031).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
SMC Korea 2024 to Highlight Semiconductor Materials Trends and Innovations on Industry’s Path to $1 Trillion
04/24/2024 | SEMIWith Korea a major consumer of semiconductor materials and advanced materials a key driver of innovation on the industry’s path to $1 trillion, industry leaders and experts will gather at SMC (Strategic Materials Conference) Korea 2024 on May 29 at the Suwon Convention Center in Gyeonggi-do, South Korea to provide insights into the latest materials developments and trends. Registration is open.