Momentus Completes Solar Array Test Campaign Ahead of Next Mission
October 18, 2022 | Business WireEstimated reading time: 1 minute
Momentus Inc., a U.S. commercial space company that offers transportation and other in-space infrastructure services, has completed comprehensive ground testing of the solar arrays that will support its second demonstration mission scheduled to launch on the SpaceX Transporter-6 mission in December 2022.
The test campaign included functional, performance and environmental testing for sub-system components and the fully integrated solar arrays on the Vigoride Orbital Service Vehicle. The solar arrays are designed to deploy from Vigoride shortly after separation from the launch vehicle and track the sun throughout the mission to generate power.
“We expanded our solar array test campaign with the aim of ensuring that this key system for our mission will operate as intended,” said Momentus Chief Executive Officer John Rood. “The Momentus team has been working closely with our solar array vendor that has been supporting our comprehensive testing campaign to prepare for our next flight. On our first Vigoride demonstration mission in May, we experienced an issue with a pin in a hold-down bracket not releasing. This enhanced test campaign is aimed at preventing similar issues in the future.”
“We’re excited about our next launch of the Vigoride vehicle targeted for December and the innovative customer payloads it will carry,” said Rood. “Vigoride will carry a hosted payload for Caltech's first space solar power demonstration and deploy a satellite for Qosmosys that evokes the spirit of innovation from NASA’s Voyager mission to explore the solar system. We also plan to fully test our Microwave Electrothermal Thruster propulsion system that uses water as a propellant in space.”
Momentus plans to fly the next generation of its Vigoride Orbital Service Vehicle on the SpaceX Transporter-6 mission. The vehicle design has been modified to increase payload capacity and reduce launch loads transmitted to Momentus' customers. This version of Vigoride also introduces some modularity – particularly with the propulsion system, which should allow Momentus to more easily tailor the vehicle for each mission's unique transfer profile.
Suggested Items
Lockheed Martin Australia, The Department Of Defence Sign Strategic Partnership Head Contract
04/26/2024 | Lockheed MartinLockheed Martin Australia signed a landmark AUD$500 million contract with the Department of Defence to build Australia’s future Joint Air Battle Management System under project - AIR6500 Phase 1 (AIR6500-1).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.