DownStream Flexes in Rigid-Flex
November 14, 2022 | Andy Shaughnessy, Design007 MagazineEstimated reading time: 2 minutes
During PCB West, I caught up with DownStream Technologies co-founder Joe Clark and Senior Product Marketing Manager Mark Gallant. We discussed some of their latest tool updates, including a greater focus on bringing post-processing functionality, such as inter-layer analysis capability, to rigid-flex circuits. Joe also offered a look at global design trends going into 2023, as more engineers take on PCB designer roles while senior designers are retiring.
Andy Shaughnessy: Joe, give us an update on what’s been going on with DownStream for the last year.
Joe Clark: Last year was a record year for us, where we experienced over 10% growth even in the middle of COVID. We’re on track to repeat that again in 2022. Much of that is driven by our major customers adopting design-for-manufacturing and intelligent design formats. A lot of the analysis that used to be done at the end of the design process has been moving “upstream,” and that has implications on the tool capabilities, i.e., it’s got to be easy to use and have low cost of ownership. It’s hard to believe that we’ve been doing this for 20 years.
Shaughnessy: Who knew 2002 was a great time to start a company?
Clark: It was actually the worst time to start a company. But our vision was that design-for-manufacturing analysis would become a mainstream mission-critical requirement, and that the analysis would naturally move upstream. If you remember back when we were PADS, we acquired HyperLynx because our belief was that designers should be doing signal integrity checks during the design creation cycle, not at the end; we were right. We then spun out of Innoveda, took the CAM350 product with us, and added DFM analysis capabilities along with support for intelligent formats (ODB++, IPC-2581) to support in-cycle DFM analysis. We were right again.
Also, as we worked with customers, it became clear to us that another mission-critical part of the process not being addressed was the designers’ need to create detailed documentation for their PCB designs. At the time, they all used their CAD tools, but they were not created to do documentation. PCB documentation is not a “nice to do” thing; it is a necessary thing to do as part of a good new-product design process. Working with customers, and again taking advantage of the shift to neutral intelligent design formats, we developed BluePrint to address the needs for creating quality, adaptable PCB documentation.
Shaughnessy: Most designers love doing layout, but they hate post-processing and documentation creation.
Clark: They hated doing it, especially documentation, in large part due to the nature of the existing tools. They were simply too difficult to use in the design cycle. We focused on providing tools of high functionality combined with ease of use. For PCB documentation, we developed a tool to automate it, to leverage the intelligence of the design to allow users to create, in a very automated way, comprehensive PCB documentation to their particular requirements. Believe me when I say that PCB doc requirements vary greatly company to company and often even division to division. Our BluePrint tool is fully customizable.
Shaughnessy: What is your focus as we head into 2023?
Clark: There are new trends coming, and our most recent focus is on rigid-flex. Working with companies like Microsoft, we realized that there are really no tools to address a host of new challenges: multiple stackup regions, the potential problems from bending a circuit, inter-layer dependencies, and other such technological obstacles.
To read this entire conversation, which appeared in the November 2022 issue of Design007 Magazine, click here.
Suggested Items
Elementary, Mr. Watson: Ensuring Design Integrity
03/28/2024 | John Watson -- Column: Elementary, Mr. WatsonBack in February, many of us watched the "Big Game." It reminded me of the saying, “It's not how you start that is important, but rather how you finish." It is perfectly okay when you are talking about sports, you get off to a bad first half and need to recover in the second half. However, when it comes to PCB design, this is not a good practice. If things start badly, they usually don't recover. They continue down that same path, costing more money and losing design time.
Arrow Electronics Launches Intelligent Vision Ecosystem
03/27/2024 | BUSINESS WIREArrow Electronics, Inc. is utilizing the onsemi Imager Access System (IAS) module standard for developing intelligent vision solutions for use in robotics, machine vision, commercial cameras and other uses.
Dymax Will Exhibit Light-Cure Solutions for Today’s Electronics at IPC APEX 2024
03/26/2024 | DymaxDymax, a leading manufacturer of rapid and light-curing materials and equipment, will exhibit at the IPC APEX EXPO 2024 in Anaheim, CA, April 9-11.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.
New North American Product Family Release from Smart Factory Design
03/22/2024 | Smart Factory DesignSmart Factory Design is pleased to announce a new system technology and supply chain model for providing Zero Liquid Discharge (ZLD) Wastewater Recycling Systems to the North American market. Smart Factory Design is an international public benefit company focused on environmental sustainability and autonomous processes for the Printed Circuit Board, IC Substrate, and General Metal Finishing industries.