I-Connect007 Editor’s Choice: Five Must-Reads for the Week
February 10, 2023 | Nolan Johnson, I-Connect007Estimated reading time: 3 minutes
Pull back the rubber band of a slingshot and hold it there. As you do so, you’ll feel the tension, the gathered potential energy. It almost makes your hand quiver just to hold it. Release the rubber band and the object in the slingshot’s pocket launches, hurtling forward as if impatient from waiting so long.
This week, the news feels just like a slingshot. The 2020-21 craziness caused us to pull back and hold there, even while research and development work continued. Tension built as we held; we learned new areas of opportunity while we waited. Then when we finally returned to something closer to historical normal, the research and development work has come flying out at a tremendous pace.
It shows in this week’s news. We have new projects in the U.S. Army space programs, research on gold thickness and solderability, a call for papers throughout 2023 from SMTA, an investment in Korean facilities by ASM, and an adjustment in TTM’s assignation with the U.S. DoD. All together, these five must-reads represent the hurtling trajectory that R&D seems to be following in 2023.
TTM Adopts Special Board Resolution with DCSA Replacing SSA
Published February 6
“Since the SSA was established in 2010, there has been a significant reduction in the foreign ownership of TTM’s public shares and our one non-U.S. citizen board member has retired,” said Rex Geveden, chairman of the Board of TTM. “As a result, the DCSA has agreed to replace the SSA with the SBR. The company plans to maintain much of the robust infrastructure developed during the adoption of and compliance with the SSA to continue to serve our customers and to maintain our focus on the national security of the United States in our Aerospace and Defense Sector, as one of the top 40 U.S. based defense companies.”
CACI Enters Agreement with U.S. Army to Develop, Test Advanced Capabilities on Demonstration Satellite
Published February 6
If you’re not familiar with CACI, according to their website, the company provides “expertise and technology to enterprise and mission customers in support of national security missions and government transformation for defense, intelligence, and civilian customers.”
To that end, CACI International announced that it had “signed a five-year cooperative research & development agreement (CRADA) with the U.S. Army Space and Missile Defense Technical Center (USASMDC-TC) to further the development of advanced payload technologies, space sensor applications, and resilient Positioning, Navigation & Timing (PNT).”
It's hard not to conclude that we are entering into the true golden age of space presence, The 1960s NASA and Soviet space programs may have proven that space travel was possible, but the privatization of space access, and the presence now of multiple countries capable of achieving orbit, speaks to the steady growth of practical space access. Government and DoD work to make space access more accessible continues the momentum. Read about it here.
SMTA: Call for Participation at 2023 Conferences
Published February 8
SMTA has announced the schedule of events in 2023 for which they are accepting papers. With what seems to be a noticeable uptick in research and development across the industry, perhaps you have recent work to share? Check here to find the conferences that best fit your work … then submit it!
ASM Set to Invest Around $100M in Korean R&D, Manufacturing Operation
Published February 3
R&D isn’t the only part of our industry benefitting from investment and increased activity. Manufacturing buildouts continue apace. Seems it’s not just the U.S. and EU standing up manufacturing, either. Korea and Japan have recently announced new strategic investment as well. This week it was ASM standing up Korean development and production. Get the details here.
Why Gold Layer Thickness in ENIG Matters for Soldering
Published February February 7
Dr. Britta Schafstellar and team published a report on their work with gold final finish. Opening their paper is this, “The main task of the final finish is to protect the copper pad from tarnishing or oxidation while simultaneously keeping the surface active for the assembly. Electroless nickel/immersion gold (ENIG) is a widely accepted finish in the market that provides a good solderability and capability for Al-wire bonding. A main function of the gold layer is to prevent the oxidation of the nickel layer.” The Schafstellar team go on to deliver a detailed look at the relationship between soldering and gold layer thickness; readers found this informative based on the number of reads.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.