-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
IPC Design Competition Wrap-up
April 6, 2023 | I-Connect007 Editorial TeamEstimated reading time: 2 minutes
The IPC Design Competition took place during IPC APEX EXPO 2023, with five finalists competing—a far cry from the original 49 entries last fall. After the competition was over, we spoke with Kris Moyer, the IPC instructor who created the design used in the competition and served as a design advisor and judge for the event.
We asked Kris to give us a quick wrap-up of the competition, as well as his thoughts on this year’s design, which none of the finalists completed.
Andy Shaughnessy: Kris, would you give us a brief rundown on the design competition?
Kris Moyer: To provide a better challenge for our competitors, we added some additional levels of complexity over last year’s design. We had five finalists, three here at IPC APEX EXPO, plus the two finalists from our India branch. We ran them through the design yesterday, and we saw some very interesting designs. We came down to one clear winner, although I will say it was very close between the first and second place.
As far as complexity, this year we ended up with a multilayer rigid-flex board incorporating several more advanced complexities: sequential lamination, HDI, advanced packaging, controlled impedance, high-speed digital design, and power distribution design. Our competitors didn’t finish, but they showed a lot of excellent technique and capability.
Shaughnessy: Some said that they never worked with rigid-flex before.
Moyer: That’s right. Unlike last year, all the competitors this year were given the opportunity for a one- to two-hour individual session with me on Monday evening before the competition. I also provided a two-hour cram session where we reviewed not only the tool, but all the different features and technologies that we have to use. So, although they may never have routed rigid-flex before, I introduced them to it and some the issues they would be involved with.
Shaughnessy: Who was the winner?
Moyer: The winner was Sathishkumar Vijayakumar of Tessolve, one of our finalists from India. He did quite well in the work that he was able to complete. He showed good technique, complexity, and the broadest range of features and methodologies. Adam Thorvaldson of Innovex came in second. Adam also had a good amount of design complexity and features, so it was very close.
Kelly Dack: Kris, were these designs graded on manufacturability?
Moyer: Yes, that was one of the criteria, and we gave them some rules up front. The bulk of the design rules were provided to them already in the design because of the time limitations, but we said, “Here’s the range of via sizes you can make. You can make microvias for the BGA escape routing all the way up to larger, higher-current vias for the power distribution, etc.”
To read this entire conversation, which appeared in the March 2023 issue of Design007 Magazine, click here.
Suggested Items
Altus Group Helps BitBox Unlock Productivity and Efficiency Gains with New Reflow Oven
04/22/2024 | Altus GroupAltus Group, a leading provider of capital equipment, has recently assisted BitBox, a UK-based electronics design, engineering and manufacturing company in upgrading its operations with the implementation of a new reflow oven from Heller Industries.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.
Cadence Unveils Palladium Z3 and Protium X3 Systems
04/18/2024 | Cadence Design SystemsThe Palladium Z3 and Protium X3 systems offer increased capacity, and scale from job sizes of 16 million gates up to 48 billion gates, so the largest SoCs can be tested as a whole rather than just partial models, ensuring proper functionality and performance.
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
On the Line With... Podcast Talks With Cadence Expert on Manufacturing
04/18/2024 | I-Connect007In “PCB 3.0: A New Design Methodology: Manufacturing” Patrick Davis returns to the podcast to talk about design rules. As design considerations become more and more complex, so, too, do the rulesets designers must abide by.