DownStream Discusses Rigid-flex and DFM Trends
May 2, 2023 | Kelly Dack, CID+, EPTACEstimated reading time: 3 minutes
I recently sat down with Joe Clark, founder, and Ray Fugitt, technical marketing manager, of DownStream Technologies to discuss trends in tool design and manufacturing, including rigid-flex design and refreshed graphical user interfaces (GUI).
Kelly Dack: Gentlemen, thanks for speaking with me. Let's talk about design for manufacturability (DFM) trends and how your tools play into these.
Joe Clark: The biggest trend that we're seeing now, and the one we're highlighting in our products, is the proliferation of rigid-flex design. It presents challenges, from documentation of multiple stackups and zones to DFM analysis. Many of our customers are asking how they use these tools to solve problems that they’re dealing with now.
Dack: Ray, tell us how this plays into DFM from the standpoint of both the designer and the manufacturer.
Ray Fugitt: Thanks. My background is in rigid, so rigid-flex has been a learning process for me. Our last two releases are dedicated to flex and rigid-flex designs. We work with some large OEMs that do rigid-flex every day. We basically borrowed the rules and challenges that they’re seeing and incorporated them into our DFM tool.
Dack: When designers are setting up DFM rules and constraints in design tools or analysis software, they often ask, “What constraints do we enter? How do we find the design and manufacturing constraints for setting the tool?” So, do they come from the board supplier or are there general specifications?
Fugitt: Funny, I thought they’d ask whether the constraints come from the design rules or the fabricator. It's not an either/or situation. Basically, with our tool, you can choose to set and run it against your own internal design rules or your fabricator’s capabilities. We actually include a real-world example of design for assembly (DFA) from an American board shop, and we include that in our software. It's a starting point and then you work from there.
Dack: Very good. And let's talk about what else you are working on now.
Fugitt: Sure. BluePrint is our documentation tool. If you think about all the documentation that goes along with doing a PCB design, our existing competition for this tool is actually all the workarounds that people have devised over the years. There's no other tool out there that does what this does. We automate the creation of PCB documentation. You bring in the design, and a lot of your documentation is done right there. Then, you just work with the rest of it.
CAM350 and DFMStream are our analysis tools. As you probably know, CAM350 has a had a long history in the PCB fabrication sector. It's grown throughout the years and has transitioned to also become a very robust and powerful analysis tool, although it still does fabrication very well. But it mainly does things like DFM, design compares, netlist compares, and other things to address common problems earlier in design chain.
We recently held a user group meeting, and it was well attended. We talked about some of its newer features, such as its more modern interface. This new GUI came around a few years ago, and we continue to evolve it. We put in a new graphic engine to make it redraw quicker. We addressed some of the more aggravating things that happen when you're using a tool like this. We've done as much as we can to make this tool a lot more powerful.
Dack: Ray, you’ve been posting a lot of helpful online videos.
Fugitt: Yes. I'm a YouTube personality. I have almost 500,000 hits on YouTube.
Dack: You are indeed! You're a social media influencer. Not quite like Elon Musk, but you influenced me, and in a good way.
Fugitt: Glad I could help.
Dack: Very good. It’s been great speaking with you gentlemen.
Clark: Thanks, Kelly. It’s always a pleasure.
Suggested Items
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Altus Group Helps BitBox Unlock Productivity and Efficiency Gains with New Reflow Oven
04/22/2024 | Altus GroupAltus Group, a leading provider of capital equipment, has recently assisted BitBox, a UK-based electronics design, engineering and manufacturing company in upgrading its operations with the implementation of a new reflow oven from Heller Industries.
Real Time with... IPC APEX EXPO 2024: Exploring IPC's PCB Design Courses with Kris Moyer
04/18/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and IPC instructor Kris Moyer discuss IPC's PCB design training and education offerings. They delve into course topics such as design fundamentals, mil/aero, rigid-flex, RF design, and advanced design concepts. They also highlight material selection for high-speed design, thermal management, and dissipation techniques. The interview wraps up with details about how to access these courses online.