Fresh PCB Concepts: Key Considerations for Reliability, Performance, and Compliance in PCBs
Elementary Mr. Watson: Navigating RF—A Glide Path Approach to Design Success
Designers Notebook: Layer Stackup Planning for RF Circuit Boards
ARC Technologies Exhibiting at Design Con 2016
January 21, 2016 | ARC TechnologiesEstimated reading time: 2 minutes
ARC Technologies is showcasing its wide range of capabilities to solve microwave and RF interference, radar absorbing, and EMI control challenges at 2016 Design Con (www.designcon.com) in Santa Clara, CA.
Learn more about ARC Technologies new testing capabilities and solutions, including their newest Hot Melt Absorbers, Focused Beam Testing system providing electromagnetic test capabilities up to 110 GHz, the ARC Clear Conductive Electromagnetic Shielding AC2ES™, and the latest automotive anti-collision radar materials.
The latest Hot Melt Absorber product line gives the customer a very simple and fast way to apply absorber to a surface that requires noise suppression, for example a PCB. Different hot melt products are available depending on application and frequency requirement.
The AC2ES is an advanced, optically clear, transparent, thin-film conductor that provides excellent EMI shielding and conductivity. It is a robust, ultra-thin, flexible film incorporating conductive nanoparticles and a low-cost direct replacement for Indium Tin Oxide (ITO) films. AC2ES is available in flat or 3D form, or can be supplied pre-cut to exact customers’ specifications.
Addressing automotive radar designers and autonomous vehicle technology needs for accuracy and reliability, ARC Technologies has perfected a family of optimal RF noise mitigation materials. These materials can be formulated, molded or otherwise fabricated to best suit the application. ARC Technologies can help get technology up to speed with new radar absorber products SB1009, SB1006, and MC1000. Its SB and MC series absorbers are weather and chemical resistant and are suitable for use on the vehicle body, bumpers and other exterior surfaces.
ARC provides material testing and qualification services to many ASTM and MIL standards. It offers electromagnetic test capabilities up to 110 GHz with the addition of a focused beam system. Measuring a material’s permittivity (ε) and permeability (μ) is critical in the design and development of high frequency materials and systems. The ARC Technologies Inc. focused beam system allows for non-destructive, accurate measurements of these material parameters, including reflection and transmission loss, from 2-40 GHz and 75-110 GHz. The testing service provides customers a more affordable and fast way to turn around their testing needs.
Page 1 of 2
Share on:
Suggested Items
Taiwan's PCB Industry Chain Is Expected to Grow Steadily by 5.8% Annually in 2025
05/05/2025 | TPCAAccording to an analysis report jointly released by the Taiwan Printed Circuit Association (TPCA) and the Industrial Technology Research Institute's International Industrial Science Institute, the total output value of Taiwan's printed circuit (PCB) industry chain will reach NT$1.22 trillion in 2024, with an annual growth rate of 8.1%.
New Database of Materials Accelerates Electronics Innovation
05/05/2025 | ACN NewswireIn a collaboration between Murata Manufacturing Co., Ltd., and the National Institute for Materials Science (NIMS), researchers have built a comprehensive new database of dielectric material properties curated from thousands of scientific papers.
DuPont Exceeds Quarterly Profit Expectations as Electronics Segment Benefits from Semiconductor Demand
05/05/2025 | I-Connect007 Editorial TeamDuPont reported higher-than-expected earnings for the first quarter of 2025, supported by increased demand in its electronics and industrial segments. The company’s adjusted earnings per share came in at 79 cents, surpassing the average analyst estimate of 65 cents per share, according to data from LSEG.
SEMICON Europa 2025 Call for Abstracts Opens for Advanced Packaging Conference and MEMS & Imaging Summit
05/05/2025 | SEMISEMI Europe announced the opening of the call for abstracts for SEMICON Europa 2025, to be held November 18-21 at Messe München in Munich, Germany. Selected speakers will share their expertise at the Advanced Packaging Conference (APC), MEMS & Imaging Sensors Summit, and during presentations on the show floor.
New Database of Materials Accelerates Electronics Innovation
05/02/2025 | ACN NewswireIn a collaboration between Murata Manufacturing Co., Ltd., and the National Institute for Materials Science (NIMS), researchers have built a comprehensive new database of dielectric material properties curated from thousands of scientific papers.