The Sum of All Parts: The Cost of Quality
March 9, 2016 | Sam Sangani, PNC Inc.Estimated reading time: 2 minutes
Throughout the decades, irrespective of industry or sector, markets have thrived on competition. They have, however, also relied upon some semblance of unity within their respective competitors. Industries rely upon their individual member companies’ ability to work together for the greater good.
The PCB industry is no different.
First and foremost, the desire for the utmost quality through parts manufactured in the United States is something that we should all be committed to. Here at PNC, we like to say, "We'd rather explain the cost of quality than have to apologize for the lack of it." The pros of using and buying PCBs in the United States, as opposed to Asia far outweigh the cons and the inverse holds true as well. Besides the obvious reasons such as promoting the domestic economy instead of a foreign one and keeping the jobs stateside, the most important factor is quality. Today’s customer—understandably so—has been forced to think from a cheaper-now perspective and has not been able to give any thought to longevity. The very same customer is subsequently required to buy more frequently due to the fact that the whole is less than the sum of its foreign parts.
Some may think that this is better for us, the actual producers of the boards, due to a frequent turnaround. However, with a sacrifice in quality of goods provided comes a sacrifice in the reputation of the business—and by extension, the industry—providing said goods. Another key facet of made-in-America boards is the service provided by the firm designing, making and/or assembling them. Sure, when you buy from Asia, the pricing is extremely competitive; however, chances are you are dealing with a broker whose only concern is their percentage. For brokers, promptness, quality and longevity take a backseat to commission and personal gain. In the unfortunate event that your order is late or revisions need to be made, they are long gone.
Perhaps the most important downfall of Asian-made boards is their manufacturing practices. Bare minimums are keys to the pricing success that makes U.S. board manufacturers at a disadvantage. For example: The IPC Standard states 1.97 Au over 118 Ni, but it is often seen that the overseas boards are far under the standard amounts of Au and Ni. It may look good, but this will certainly have an effect on the solderabilty. But how can we all do our part?
As a board house, we can all focus on educating our customers with regards to why it is worth the extra dollars to get the job done stateside. Most consumers of PCBs already have some semblance of knowledge about the product they are asking for and will know some of the pros and cons.
As a customer, you can think about your end user. Whether it is for the mass production of a board, which will then be incorporated into a box build or for a small run of prototypes, the goal is to overall deliver the best product possible. That is something we can all agree on is easiest to accomplish in this country.
Sam Sangani is president and CEO of PNC Inc.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/26/2024 | Andy Shaughnessy, Design007 MagazineIn this week’s roundup, we have a variety of articles covering everything from design through assembly, and even box build. I’ve always wondered whether box build was all it was cracked up to be. Do customers really pick one EMS provider over another because one company offers box build? And if you’ve ever wanted to volunteer, IPC’s Thought Leaders Program is looking for a few good technologists to help them on their mission. Check out Stanton Rak’s article, which was published in the spring issue of IPC Community.
Stan Rak: Elevating the Ideas and Insights of IPC's Thought Leaders Program
04/25/2024 | Stanton Rak, SF Rak CompanyAs a member of the IPC Thought Leaders Program (TLP), I am responsible for identifying knowledge-sharing opportunities that can generate ideas and insights that strengthen the IPC community as well as create a sustainable and lasting future for its members. I am delighted to highlight some of my recent contributions as a member of the TLP.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).
IPC Design Competition Champion Crowned at IPC APEX EXPO 2024
04/24/2024 | IPCAt IPC APEX EXPO 2024 in Anaheim, California, five competitors squared off to determine who was the best of the best at PCB design.
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.